Punisher w/o Interface board: Sound ?

Black IcE

Earl's Long Lost Brother,
15 Year Member
Joined
Jun 29, 2005
Posts
922
I've been working on reviving a friend's Punisher board and it plays great now, minus the fact that I get no sound. After doing some reading, I gather that this may be because it does not have an interface board to connect the q-sound board and the motherboard.

I found this page...
http://wiki.arcadeotaku.com/w/CPS1#CP_System_Dash
That details the pinouts for each of the connectors.

From what I can gather, I need to run the Jamma speaker + and - lines from the Q-Sound board CN9 to the mother board edge connector. Do I need to run 12v and ground lines between the two as well ? Any confirmation, help, or clarification would be greatly appreciated. Thanks.
 
Last edited:

Black IcE

Earl's Long Lost Brother,
15 Year Member
Joined
Jun 29, 2005
Posts
922
Excellent. I'll give this a go and report back. Thanks!
 

Black IcE

Earl's Long Lost Brother,
15 Year Member
Joined
Jun 29, 2005
Posts
922
Got it wired up and its working great now. Thanks for the help!
 
Top