- Joined
- Dec 9, 2006
- Posts
- 2,386
I've been having similar problems in both RGB and component mode using original cables shipped with the system. In RGB mode it tends to lose sync or one of the colors, and in component mode it loses red much like you describe. Sometimes re-connecting the cable would solve the problem, and other times a reboot seems to do the trick. I think in my case it may be a problem with the video board or the mini-DIN connector being loose.
I might pick up one of those replacement boards at some point but for now the video problems aren't too common on my end.
Same question as above. How long have you owned the system and the cables? I've made some adjustments to how the video board is put together over the years so a loose mini-din connector is not out of the impossible.