Page 2 of 2 FirstFirst 12
Results 26 to 29 of 29

Thread: Sony WEGA Trinitron CRT TV service menu Tips, Tricks and settings suggestions

  1. #26
    Slow Posting User Action
    ni-ten's Avatar
    Join Date
    Sep 2002
    Location
    NRW

    Posts
    296
    Just figured it out. This particular Sony ONLY accepts changes with a 50Hz signal present. With 60Hz the geometry settings are locked. Thx anyway.

  2. #27
    Thou Shalt Not
    Question Rot.
    xsq's Avatar
    Join Date
    Jan 2013
    Location
    Muenster, Germany

    Posts
    7,318
    such bullshit. it's a shame it can't be tweaked well, the tube should be very decent.

  3. #28
    .
    Join Date
    Dec 2017
    Location
    Italy

    Posts
    3
    Anyone whit a sony trinitron kv29cl11k or similar can tell me why I can't save changing of Csec value under "design" in service menu? It must be set to 0000, 0001 or 1000... but keep going
    To 1100 and everything tends to yellow...
    Service menu is like this:
    https://youtu.be/S9HjJI8MyTc
    Last edited by vj88; 01-01-2018 at 04:53 PM.

  4. #29
    Armored Scrum Object

    Join Date
    Jun 2012
    Location
    nowhereland

    Posts
    253
    So i'm looking at this guide trying to figure out where I need to start.

    My tv has a bend in the screen where the middle of the screen is higher than the left and right sides. I'm trying to level that line out again. Also the edges of the square picture arent straight.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •