Just figured it out. This particular Sony ONLY accepts changes with a 50Hz signal present. With 60Hz the geometry settings are locked. Thx anyway.
Just figured it out. This particular Sony ONLY accepts changes with a 50Hz signal present. With 60Hz the geometry settings are locked. Thx anyway.
such bullshit. it's a shame it can't be tweaked well, the tube should be very decent.
Anyone whit a sony trinitron kv29cl11k or similar can tell me why I can't save changing of Csec value under "design" in service menu? It must be set to 0000, 0001 or 1000... but keep going
To 1100 and everything tends to yellow...
Service menu is like this:
https://youtu.be/S9HjJI8MyTc
Last edited by vj88; 01-01-2018 at 04:53 PM.
So i'm looking at this guide trying to figure out where I need to start.
My tv has a bend in the screen where the middle of the screen is higher than the left and right sides. I'm trying to level that line out again. Also the edges of the square picture arent straight.
A bit of an old thread bump. But, I got a fix for this!
https://youtu.be/ZT5ariz5-X0
In case anybody else comes across this issue!
Praise to op for posting and saving this, this has been a lifesaver for my monster. I can’t get it perfect but it is certainly a lot better. My menu has so many options not listed though, would love to know what they all are. It’s a kv-36xbr800 , if there is a more detailed menu description out there that anyone knows of please post up!
Currently listening to:
My Tinnitus
Kneel before Yodd, indeed! Thanks, this info helped me fixed some issues with a recent TV pickup.
Hello.
I Have a KV32FS100 in the service manual I found the list at the beginning of this post plus some more inputs inlcuding meaning. The models for what this list will work are easily readable in the top right of the image attached.
Have fun.
-Juegame.
01.png
Last edited by jueGAME; 03-10-2020 at 09:35 PM. Reason: English is my third language, so I catch a few mistakes.
Hello.
How to use the SERVICE MODE. So far I have it tested with all my SONY tvīs (including LCDīS) so it works.
Attachment 55992
What is the difference between RESTORE USER SETTINGS & RESET VALUES?
Restore user settings just resets back to whatever values the user (you) set in service settings. Reset values will reset them back to factory settings.
On a side note, does anyone know what setting VDP2-19 FSC is? I cannot figure out what FSC stands for, all I know is that switching it from what it was (can't recall offhand) fixed an issue I was having.
Last edited by DasiyAge; 11-05-2020 at 09:51 PM.
Be VERY careful about using the "reset" options on Sony televisions. In many cases, the "reset" values are BEFORE the factory calibration - meaning you'll need to calibrate every setting yourself afterwards.
I turned off signatures. So should you.
There are currently 3 users browsing this thread. (0 members and 3 guests)