Page 4 of 4 FirstFirst 1234
Results 76 to 86 of 86

Thread: Rom file for Naomi Null/Zero key?

  1. #76
    Mauru's Zoo Manager
    werejag's Avatar
    Join Date
    May 2005
    Location
    Oklahoma

    Posts
    2,881
    maybe one day i can get a cab. im cabless

    happy to help
    I guess it's a good day for Were-Jag... -NG: DEV.TEAM
    It's only fucking 50 USD for crying out loud. -Yakumo
    If there's one thing I hate in life more than anything else it's freeloaders. -Yakumo
    "reality has a well-known liberal bias." - Stephen Colbert

  2. #77
    .
    Join Date
    Oct 2014
    Location
    Italy

    Posts
    3
    Hi, all. I'm trying to compile the ASM code myself, but seems without success.

    These are my corrected lines from 989 to 1017 :

    NOP
    AKEYCODE
    ADDWF PCL,F ; !!Program-Counter-Modification
    ; DT 0x33,0x3E,0xE9, 0x23,0x54,0xDC,0x68,0x64 ; First 8 bytes part of DES key
    DT 0x33,0x00,0x00, 0x00,0x00,0x00,0x00,0x00
    NOP
    NOP
    NOP
    NOP
    NOP
    NOP
    NOP
    BKEYCODE
    ADDWF PCL,F ; !!Program-Counter-Modification
    ; DT 0x34,0x2F ; Last 2 bytes of DES key
    DT 0x34,0x00
    NOP
    NOP
    NOP
    NOP
    NOP
    NOP
    NOP
    NOP
    FILENAME
    ADDWF PCL,F ; !!Program-Counter-Modification
    ; DT "5BGB.BIN"
    DT "5ABC.BIN"
    NOP

    What's my fault(s)?

  3. #78
    .
    Join Date
    Oct 2014
    Location
    Italy

    Posts
    3
    Quote Originally Posted by Pa0l0ne View Post
    Hi, all. I'm trying to compile the ASM code myself, but seems without success.

    These are my corrected lines from 989 to 1017 :

    NOP
    AKEYCODE
    ADDWF PCL,F ; !!Program-Counter-Modification
    ; DT 0x33,0x3E,0xE9, 0x23,0x54,0xDC,0x68,0x64 ; First 8 bytes part of DES key
    DT 0x33,0x00,0x00, 0x00,0x00,0x00,0x00,0x00
    NOP
    NOP
    NOP
    NOP
    NOP
    NOP
    NOP
    BKEYCODE
    ADDWF PCL,F ; !!Program-Counter-Modification
    ; DT 0x34,0x2F ; Last 2 bytes of DES key
    DT 0x34,0x00
    NOP
    NOP
    NOP
    NOP
    NOP
    NOP
    NOP
    NOP
    FILENAME
    ADDWF PCL,F ; !!Program-Counter-Modification
    ; DT "5BGB.BIN"
    DT "5ABC.BIN"
    NOP

    What's my fault(s)?
    No problems at all.. Just editing of a couple of others parameters and even my 16F628 04/P keep rocking on my netdimm.
    Thanks all for the thread.

  4. #79
    Mauru's Zoo Manager
    werejag's Avatar
    Join Date
    May 2005
    Location
    Oklahoma

    Posts
    2,881
    so you are good now?
    I guess it's a good day for Were-Jag... -NG: DEV.TEAM
    It's only fucking 50 USD for crying out loud. -Yakumo
    If there's one thing I hate in life more than anything else it's freeloaders. -Yakumo
    "reality has a well-known liberal bias." - Stephen Colbert

  5. #80
    .
    Join Date
    Oct 2014
    Location
    Italy

    Posts
    3
    Quote Originally Posted by werejag View Post
    so you are good now?
    Yes, thanks.

  6. #81
    Genyosai's Servant
    skate323k137's Avatar
    Join Date
    Jan 2013
    Location
    Earth, Dimension C137

    Posts
    2,968
    I was able to (re)program one successfully on a top2049. I had to compile the source myself using the corrections werejag suggested, but I also had to change AIJOYANSWER in order to allow the netboot script to exit without the game crashing. I had to comment out the one ending with 0x00 and uncomment the 0x01 line.

    AIJYOANSWER
    ADDWF PCL,F ; !!Program-Counter-Modification
    ; DT 0x3A,0x70,0x1F,0x71,0x1F,0x00,0x00,0x00
    DT 0x3A,0x70,0x1F,0x71,0x1F,0x00,0x00,0x01

  7. #82
    Choi's Barber
    kuze's Avatar
    Join Date
    Apr 2013
    Location
    In the year 2248

    Posts
    2,210
    Why doesnt anyone just post the full corrected code?

  8. #83
    Genyosai's Servant
    skate323k137's Avatar
    Join Date
    Jan 2013
    Location
    Earth, Dimension C137

    Posts
    2,968
    Quote Originally Posted by kuze View Post
    Why doesnt anyone just post the full corrected code?
    This works for me for netboot with the python script and allows the PC to disconnect after booting. Compiled with mplab, burned with topwin using the settings outlined in the code comments at the top: http://pastebin.com/2Da2pAgD

    I believe for CF you need to change AIJYOANSWER (comment out line 938 and uncomment 937). I'm not sure on that, so it would be nice if someone tested/verified. You also might consider changing the FILENAME section, and possibly changing the 0x33 and 0x34 in the DES key to 0x00. I have no CF setup to verify any of that though.

  9. #84
    Choi's Barber
    kuze's Avatar
    Join Date
    Apr 2013
    Location
    In the year 2248

    Posts
    2,210
    Thanks man, that's awesome.

  10. #85
    Mauru's Zoo Manager
    werejag's Avatar
    Join Date
    May 2005
    Location
    Oklahoma

    Posts
    2,881
    x34 and x33 are needed as it part of the answer. dont x00 those or you are simply breaking it. cf is treated as gdrom. so change AIJYOANSWER
    Last edited by werejag; 02-06-2016 at 07:44 PM.
    I guess it's a good day for Were-Jag... -NG: DEV.TEAM
    It's only fucking 50 USD for crying out loud. -Yakumo
    If there's one thing I hate in life more than anything else it's freeloaders. -Yakumo
    "reality has a well-known liberal bias." - Stephen Colbert

  11. #86
    . hydropeter's Avatar
    Join Date
    Apr 2016
    Location
    Belgium

    Posts
    1
    I have been trying to get my Triforce race cab running with a Cf card adapter but I知 stuck at the PIC too. I have compiled various versions of the pastebin sources and burned many PICs without result. It always gives me the 杜edia board malfunctioning error. I have the official Sega CF adapter and the zeroed game images. They work perfectly with netbooting (a PIC that I bought years ago which is protected so I cannot read it out). I also have a programmer and a large stock of PICs so if anyone would be so kind to provide a hex and maybe the correct programmer settings I would be forever grateful!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •