Results 1 to 7 of 7

Thread: Life Force PCB stuck in reset loop and experiencing video issues

  1. #1
    H = Hot
    M = Macho
    G = Gay
    HeavyMachineGun's Avatar
    Join Date
    Apr 2011
    Location
    Canada

    Posts
    3,810

    Life Force PCB stuck in reset loop and experiencing video issues

    Got a particularly problematic Life Force PCB here. The 68000 keeps getting its reset line pulsed and the video keeps going out of sync and cutting out. A Mask ROM pertaining to data common to Life Force and Salamander is confirmed dead.

    Several of the 74LSXX chips related to the 68k's 9MHz clock signal and the graphics chipset have been replaced. The 68k's clock oscillator has also been replaced. Issues still persist. Any ideas?

    Power supply is ATX, 5v is 4.86 on average.

    (this thread pertains to the woes of a friend of mine)

  2. #2
    The Chinese Kid Kid Panda's Avatar
    Join Date
    Jun 2010
    Location
    Panda Islandô

    Posts
    11,137
    This board is a nightmare, I wish I could help, maybe busty can chime in on this.

  3. #3
    H = Hot
    M = Macho
    G = Gay
    HeavyMachineGun's Avatar
    Join Date
    Apr 2011
    Location
    Canada

    Posts
    3,810
    Fortunately, a good update on this board. While testing, the 68k stopped resetting long enough for the board to finish its self test, all ROMs are okay.

    Any ideas on the resetting and the bad video sync?

  4. #4

  5. #5
    Trollbox Trade Federation
    bustedstr8's Avatar
    Join Date
    Oct 2007
    Location
    Boston Burbs

    Posts
    1,010
    It's probably Fujitsu plague. The Fujitsu rams and logic seem to fail in bunches on this board, LS245s being the worst offender.
    Clowns Suck


  6. #6
    H = Hot
    M = Macho
    G = Gay
    HeavyMachineGun's Avatar
    Join Date
    Apr 2011
    Location
    Canada

    Posts
    3,810
    My friend said he'll continue searching for bad logic chips before he attempts swapping the work RAM chips.

    He found another dead 74LS245 near the 68000's databus (8 least significant bits), solder point 14D. That logic chip was replaced, board boots up now, but the video issues remain. The game will return to its reset loop when the video goes dead.

    Any ideas?

  7. #7

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •