- Joined
- Jan 30, 2002
- Posts
- 9,214
Hi there!
Just wanted to share a project I made some weeks ago, but didn't had any minimal decent camera to take pictures of it.
I took a Vodafone Cable TV box to host all of the wiring.
Also placed a PCB mounted Scart RGB plug on the back for easy RGB/Audio connections.
Power comes directly from the box PSU, which has unfortunately no -5V, but most JAMMA boards don't require that special voltage...
I didn't had any decent tools to make a decent cut/drill on the the front panel, so instead of ruining it, I left 2 wired DB15's on the back of the box ( still have to drill a few holes to apply screws to stick them ).
Here! Some pics.
Enjoy
On the front panel, the buttons are wired to coins, JAMMA test, Service, etc
Works like a charm!
Just wanted to share a project I made some weeks ago, but didn't had any minimal decent camera to take pictures of it.
I took a Vodafone Cable TV box to host all of the wiring.
Also placed a PCB mounted Scart RGB plug on the back for easy RGB/Audio connections.
Power comes directly from the box PSU, which has unfortunately no -5V, but most JAMMA boards don't require that special voltage...
I didn't had any decent tools to make a decent cut/drill on the the front panel, so instead of ruining it, I left 2 wired DB15's on the back of the box ( still have to drill a few holes to apply screws to stick them ).
Here! Some pics.
Enjoy
On the front panel, the buttons are wired to coins, JAMMA test, Service, etc
Works like a charm!