I don't mind at all . Part of my goal with this project was to keep it as open and transparent as possible. Unfortunately pricing is the hardest thing to determine right now (explanation below). Which sucks because at the same time, it's probably the single most important piece of information I need to find out.what are we looking on price if you dont mind me asking
I might be in touch at some point about that .Boom, filled it out and am ready.
BTW: If there is anything you need from a graphic design or art production standpoint, let me know. Would be glad to help.
Thanks, I hear ya .I hope I'm speaking for more then just myself on this one, I really appreciate the effort you're putting into this project. With that said, and now I'm totally speaking for myself, don't kill yourself on it. You're a busy guy with a lot going on. While it's admirable of you and exciting we're seeing something new and innovative for our cabs, it's not the most important thing in the world. Your children, job, and studies rank much higher. I'm in no rush for mine personally. I replaced the EL panels on my big red as soon as I got it. It's just the conversion I would like to "upgrade" so to speak. But on that note I'll probably buy 2 for when said EL panels give up the ghost.
Keep up the good work... when you have the time of course!
Thanks, I hear ya .
Small Update:
Dimmer boards came in Friday and I got one assembled over the weekend . Main controller prototype boards should be here tomorrow... (they were originally expected to arrive today)
More good news however, I FINALLY have a sample LGP LED panel coming my way . I'll likely have it by early next week and will try to get a video of the results (good or bad) ASAP.
I might need to take you up on that . There are only a couple of people on the list with MVS-6 cabs so when I'm ready for that I'll probably reach out to you and them at that time.Sounds good man! Keep up the good work and let me know if you need any 6-slot test fitment.
I might need to take you up on that . There are only a couple of people on the list with MVS-6 cabs so when I'm ready for that I'll probably reach out to you and them at that time.
Personally, I REALLY wish I could test an MVS-6 myself... not because I don't trust anyone else, I just want a damn MVS-6!
Thanks! Looks like the good LED vibes came through tonight .Glad to hear things are coming together. I continue to put forth my good LED vibes towards this project. God speed and good luck!
Video of the 5V LED panels in action... Enjoy
LOL, thanks . Definitely shoot me any ideas, suggestions, or questions you have!Loving it man.
BTW: PM coming your way about an idea.
I could definitely make two 3-panel boards for the 6-slots but it would probably be very expensive since there are so few 6-slot owners on the pre-order list (and in general). I ended up going in multiples of 2 so that the 2-slot, 4-slot, and 6-slot versions of this would all use the same parts.Great to hear this is progresses! I would definitely be interested in ordering this kit when it's available. Also, for us 6-Slot owners, the MV-EL panels (3 per PCB) are near impossible to find, so I think there is a way to wire (3) 2-Panel PCBs together as a replacement. I should have this figured out shortly (for anyone that cares).