I've tried file recovery software. It doesn't seem to be a simple password protection.
Would need someone with more knowledge than I to dig deeper.
THIS SPACE FOR RENT: Inquire Within
With everyone saying how cool the stick feels but not so good the quality on the TV, its ashame you cant plug the stick into a port so could put it on a table and play,
My uncut mini marquee layout sheet by SNK USA for ArcadeShock
You're dead to me now.
HDMI either works or it doesn't. There is no variance in quality of picture based on the cable itself.
all this talk about cables etc is kinda crazy. It's a shit picture folks. Messing around with different HDMI cables/TVs/Scalers/post processors wont really help.
Maybe they will address it with an update, maybe they wont. Right now its an awesome little handheld for your NeoGeo fix that shouldnt ever replace your AES/CMVS in the living room
As others have said, if the PQ for HDMI in general is bad for the X, a different HDMI cable won't help.
I can't tell, and there is very little documentation, but the best I can tell is that the box doesn't convert the signal at all, so if the HDMI source is 480p, the TV needs to be able to accept 480p through component. An EDTV might work, but my SDTV will not. A PVM? I have no idea.
That kind of sucks, I was hoping it would do some kind of conversion since the application description they give on the site talks about hooking a HDMI bluray player to an "old" TV. I guess they didn't mean CRTs!
Last edited by GohanX; 12-19-2012 at 02:23 PM.
So far out of the available games, SS2 is the only one I really care for....besides metal slug the rest seem kinda unplayable imo.
Hopefully someone can hack this thing or add a unibios so I can play the game in english with blood, fatalities, and a glitchy kuroko/mizuki in single player.
Yes, yes, HDMI works or it doesn't or has very noticeable problems like flickering/static pixels or bad lines.
Side note, just got my first unit about an hour ago. Man the composite is dark.
However bigger bummer for me... the PS3 NeoCD pads don't work! Heard that the PS3 Neo stick works so that raised my hopes. Will try that stick next for myself.
PS3 Neo stick works well as expected... Balltop is bigger on the PS3 stick. Shaft is also silver on the PS3. The top surface is also a bit smoother than the NGX, but not as smooth as a real AES stick. Though I like the texturing on the NGX stick.
Mine will be here in a few days. I'm most looking forward to trying the composite with my xrgb-2.
"I wasn't born with enough middle fingers"
Xbox live gamertag: Crazyquadruped
Long time lurker, first time poster here. I took one for the team. For now I'm not digging any deeper than this, but the battery is soldered directly to the board.
Also when I plug the NGX in to my windows 7 laptop, while powered off, it comes up as a removable disk. Total capacity is .99GB (or 1 gig). and 156MB is in use.
Inside is one file, "sys_update_file". I opened it in word expecting the usual gibberish but my notepad stopped responding.
Sweet, glad to see some internal pics!
Very interesting. Looks like dedicated 3.3v for WiFi, at least printed on the board.
During playback on the NEOGEO X handheld, there is sound but no image on the screen.
Did you turn off the NEOGEO X from the Station before removing it? Always turn off the NEOGEO X when connecting and disconnecting the Handheld from the Station. Firstly, please press “+” on the Brightness controllers to ensure that the screen is correctly lit. If there is still no image on screen, a soft re-set of the NEOGEO X may be necessary. To do this connect the NEOGEO X to the Station (in the standard way, with both the NEOGEO X and the Station switched off). Then turn on the Station and the NEOGEO X and please leave alone for 20 minutes for the soft re-set cycle to be completed. You will see NEOGEO X is charging when the light appears on the handheld when you open the Station. After 20 minutes your NEOGEO X should be ready to play!
I gave my local Gamestop a call to see if mine had arrived and the guy working there was like "Did that actually release? Are you sure? I didn't know! Yeah see it says here in your reservation that it has a street date in april." and I was like, uhh the Gold bundle? It came out on tuesday. It was then he informed me that they had put my reservation down for the handheld that comes out next year, not the LE bundle
Ok, this may be of use to someone who is more familiar with Linux. If you hold the start button while plugging the handheld into a pc it comes up as a JZ4770 USB Boot Device.
There are currently 1 users browsing this thread. (0 members and 1 guests)