Finally got around to installing a Neobitz

RockstarRunner

Wind Jammin' All Night",
Joined
Mar 25, 2004
Posts
645
Hi guys,
Didn't have much to do on Sunday, so was wondering what to do when I remembered I got a Neobitz V2 almost two years ago for an Amiga project I was working on, but never installed. Now I thought it might be good to install it in my Neo because the RGB Scart output (which was already modded) produced a slightly wavering image on my Sony Bravia that I was never able to figure out how to correct.

I installed the board in my Neo, wiring it up for component and composite video jacks, testing revealed a clean steady image, but it suffered from a whitening of the image. I found a thread suggesting to add a 100nf cap to the sync and that cleared the problem, now the image looks great on my Bravia. While I was performing the correction I also added in stereo audio jacks, tapped from the headphone lines, sounds great.

Now my neo has the following mods:
Socketed Unibios V3
RGB Scart Bypass
Neobitz for component and composite video
Stereo out
Power led

... yes, it does look a bit scary when you open it up now :D
 
Top