- Joined
- Feb 13, 2005
- Posts
- 22,330
I'm currently working on building a CMVS and I've stumbled across a Teac SCART CRT. I have no idea if it will accept RGB though as there isnt an owners manual and the service manual doesn't tell me the specification of the SCART socket. Unfortunately I do not have any scart devices so I cannot test anything.
Checked the OSD Menu, lets me change between PAL, AUTO and NTSC for colour system, not much else though. the SCART is only on AV1. AV2 and AV3 are composite with S-video being a seperate channel (S-VHS).
The above is now unrelated as I have a working Loewe CRT with RGB scart.
I've found this page which is making a JAMMA -> SCART adaptor look pretty easy but I'm wondering if I'm missing something here.
http://www.gameland.gr/geoanas/realarcade.htm#scart
For testing purposes I'm interested if the simple diagram on above url would be sufficient.
I've heard of adding a 100ohm resistor to the +5v to reduce that down to 2-3v. Not sure if this is needed or not as its not listed on that page. Also heard about adding 75ohm resistors to the R,G,B signals coming from the JAMMA before the SCART socket. Also not sure on that one.
Audio I wont be bothering with as I will use the CMVS headphone sockets.
Any help will be appreciated.
Checked the OSD Menu, lets me change between PAL, AUTO and NTSC for colour system, not much else though. the SCART is only on AV1. AV2 and AV3 are composite with S-video being a seperate channel (S-VHS).
The above is now unrelated as I have a working Loewe CRT with RGB scart.
I've found this page which is making a JAMMA -> SCART adaptor look pretty easy but I'm wondering if I'm missing something here.
http://www.gameland.gr/geoanas/realarcade.htm#scart
For testing purposes I'm interested if the simple diagram on above url would be sufficient.
I've heard of adding a 100ohm resistor to the +5v to reduce that down to 2-3v. Not sure if this is needed or not as its not listed on that page. Also heard about adding 75ohm resistors to the R,G,B signals coming from the JAMMA before the SCART socket. Also not sure on that one.
Audio I wont be bothering with as I will use the CMVS headphone sockets.
Any help will be appreciated.
Last edited: