bluehedgehog91
n00b
- Joined
- Jul 30, 2010
- Posts
- 36
In Jamma position it wires the speakers in series and gives dual mono sound on both speakers:
Jamma L ------ left speaker -
left speaker + ------ right speaker -
right speaker + ------ Jamma 10
total impedence is 8ohm when using 4ohm speakers
In MVS (only for *stereo* MVS boards, not the MV1C) position it's:
Jamma L ------ left speaker +
Jamma 10 ------ right speaker +
Ground ------ left/right speaker -
You're not supposed to change the switch settings for the same board and not supposed to switch with cab on.
After the time since i have finished the supergun i noticed when using the speaker output (2 speakers) if the switch is set to MONO with a MONO JAMMA board (in my case MV-1C or MV-F1S) and i UNPLUG one of ANY of the Speakers cables (+ or - of any ) from the speaker output the sound turns off in both speakers.
Is it normal?...
Xian Xi, i owe you the pics my camera died!