Results 1 to 6 of 6

Thread: Neo-29 - Hitachi GMK-29FS2 Monitor Cap List

  1. #1
    Mr Neo Fix-it channelmaniac's Avatar
    Join Date
    Nov 2005
    Location
    Dallas, Texas Metromess

    Posts
    4,235

    Neo-29 - Hitachi GMK-29FS2 Monitor Cap List

    OK folks,

    I've made some business decisions... monitors are going to be outside the scope of what I will carry for parts. With that, here's the cap list from Testocules' monitor.

    It's broken down into the following columns:
    Location Value Voltage Bi-polar? Diameter Height

    With that information you should be able to replace the caps on the monitor via Mouser.com. Check the specs list for the caps to ensure they are the right physical shape (diameter & height) to fit where it needs to go on the board. Stick with good brands: Xicon, Nichicon, or Panasonic and you won't go wrong. Also, make SURE you get 105 degree C parts to keep the board running as along as possible before needing another recap.

    Keep in mind that this list is for EVERY cap in the monitor. Typical cap kits do NOT replace all the caps in the power supply section. If I remember correctly, all the C9xx parts are the power supply caps. It's been awhile since I've looked at the board though.

    Enjoy!

    RJ

    Code:
    Hitachi GMK-29FS2					
    
    c601	10u	16v	bp	5mm	
    c701	10u	16v	bp	5mm	
    c501	47uf	16v		5mm	
    c602	1uf	50v		5mm	
    c603	1uf	50v	bp	5mm	
    c726	100uf	16v		5mm	
    c503	10uf	50v		5.3mm	
    c606	330uf	16v		8mm	
    c614	33uf	16v		5mm	
    c615	47uf	35v		5mm	
    c709	1uf	50v		5mm	
    c725	100uf	16v		5mm	
    c703	100uf	16v		5mm	
    c704	100uf	16v		5mm	
    c619	330uf	50v		10mm	
    c613	470uf	50v		13mm	
    c621	47uf	50v		7mm	
    c620	22uf	50v		5mm	
    c727	10uf	50v		5mm	
    c635	2.2uf	50v		5mm	
    c636	2.2uf	50v		5mm	
    c634	47uf	16v		5mm	
    c720	47uf	16v		5mm	
    c721	100uf	100v		10mm	
    c724	10uf	50v		5mm	
    c717	100uf	16v		5mm	
    c718	330uf	16v		8mm	
    c719	33uf	250v		13mm	
    c716	470uf	25v		10mm	
    c715	470uf	25v		10mm	
    c756	220uf	100v		15mm	
    c741	220uf	160v		18mm	
    c766	6.8uf	25v	bp	10mm	
    c760	6.8uf	25v	bp	10mm	
    c761	47uf	50v		6mm	
    c762	3.3uf	50v	bp	5mm	
    c763	4.7uf	50v		5mm	
    c740	100uf	50v		8mm	
    c915	33uf	16v		5mm	
    c924	22uf	160v		10mm	
    c916	6.8uf	25v	bp	10mm	
    c919	100uf	100v		10mm	
    c917	100uf	100v		10mm	
    c918	10uf	16v		5mm	
    c902	4.7uf	160v		8mm	
    c906	2.2uf	160v		6mm	
    c907	270uf	160v		22mm	25mm
    c908	270uf	160v		22mm	25mm
    c914	270uf	160v		22mm	25mm
    Call me a cheap bastard... I learned to fix things to save money... even surface mount soldering...

    Visit my website: http://www.arcadecomponents.com

    ---------

    I've repaired boards for many members here.

    Want me to repair your arcade game board? Look here. I do MVS, AES, and many other game boards.

    My repair logs are have moved to NewLifeGames.com!!!

  2. #2
    SouthTown StreetSweeper
    Testocules's Avatar
    Join Date
    Jan 2007
    Location
    Dallas, TX

    Posts
    558
    Thank you for posting this list Channelmaniac! I am sure many members will find this information helpful. I will be ordering a cap kit for my Super Neo 29 Type II monitor ASAP

  3. #3
    Geese's Thug

    Join Date
    Feb 2007
    Location
    Pennsylvania

    Posts
    280
    Thanks!

  4. #4
    SouthTown StreetSweeper
    Testocules's Avatar
    Join Date
    Jan 2007
    Location
    Dallas, TX

    Posts
    558

    Kit 730 available at Zanen electronics

    I worked with Aubrey Jones at Zanen and he is making up some kits. He has assigned a part number for the Hitachi GMK-29FS2 Cap list - Kit 730

    If you want to order here is the necessary info:

    Zanen Electronics
    46 Parklane Dr.
    Ransom Canyon, TX 79366
    Phone: 888.449.2636
    email: zanenelectronics@aol.com

    Just request kit 730 via email or phone and let him know how you want to pay. He accepts credit cards or paypal.

    paypal Ajones3335@aol.com

    The kit cost around $13 shipped. Hope this helps anyone that needs one.

  5. #5
    Sakura's Bank Manager
    Jaelus's Avatar
    Join Date
    Apr 2005
    Location
    Northern VA

    Posts
    875
    Both my Super Neo 29 Candy cabs have monitors labeled as Hitachi GMK-29FS3s instead of FS2s. The only markings I can find on the chassis are Hitachi GML. Anyone know if the chassis on these are the same as on the GMK-29FS2s? I'm assuming so, as I believe this chassis was used on a few different candy cabs (Q25 and New Astros I believe). I'm also wondering if the neck boards are the same as on the 29FS2s. The CRTs on these are Hitachi A68LFP227X. Any info would be appreciated.

  6. #6
    Rugal's Thug
    MuKuro's Avatar
    Join Date
    Apr 2003
    Location
    ITALY
    Posts
    90
    resume this because I have to add some important info, these chassis are also used in capcom impress where they drive Toshiba 29" tube. Same chassis is on Jaleco Pony this one is gmk-29Fj and come without control board (the trimmer pot are on the chassis itself).

    The flyback its an HITACHI 2435048, impossible to found one on the market but the good news is that usually they are so strong. When you have no picture you just look at power section where is the HOT FN651 just replace this transistor and these caps: C740. C915, c924, c906, c902 then magically the chassis will work perfect again. MOst important you must use a stepdown transformer for japan application 100v (120 or 110 not are good for these chassis)
    I have performed this on 3 dead chassis and now they work perfect.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •