Kickin' Wing
Armored Scrum Object
- Joined
- Mar 14, 2004
- Posts
- 253
Just picked up a Gunbird 2 pcb and am getting a lot of feedback out of my speakers. It very noticeably comes on when I start the cab and stays on after that.
I've tried it in 2 cabs and have the same problem on both. :edit: Turning the sound all the way down the PCB gets rid of it, but turning it up slightly the feedback resumes.
Not sure if this is at all helpful, but here's a crappy recording I made with my digicam, the *clunk* sound is me turning on the cab:
http://s130.photobucket.com/albums/p258/kickin1wing/?action=view¤t=MVI_0001.flv
Any help would be appreciated.
-wiNg+thanks
I've tried it in 2 cabs and have the same problem on both. :edit: Turning the sound all the way down the PCB gets rid of it, but turning it up slightly the feedback resumes.
Not sure if this is at all helpful, but here's a crappy recording I made with my digicam, the *clunk* sound is me turning on the cab:
http://s130.photobucket.com/albums/p258/kickin1wing/?action=view¤t=MVI_0001.flv
Any help would be appreciated.
-wiNg+thanks
Last edited: