Results 1 to 3 of 3

Thread: CPS-2 optical interface???

  1. #1

    MKL's Avatar
    Join Date
    Mar 2002
    Location
    Italy

    Posts
    3,612

    Post CPS-2 optical interface???

    Long ago I heard this rumor that Eco Fighters could be played with a spinner that would replace the buttons for clockwise and counterclockwise gun rotation, thus making for a gameplay identical to Forgotten Worlds'. Since I could not see how an optical device could be interfaced with the CPS2 hardware I always thought it was BS (the US manual of the game doesn't mention anything in this respect). But recently I found some clues that seem to back up the possibility that CPS2 makes use of optical controls.

    The Japanese flyer of Puzz Loop 2 clearly shows that you can choose either a stick or a spinner. Take a look:

    http://www.arcadeflyers.com/?page=fl...d=2070&image=1

    However, I still couldn't see how it would be possible to interface a spinner with the CPS2 mobo, since you need special hardware to encode the optical signals of the spinner. The only thing I could think of was an interface like that of The Irritating Maze:

    http://www.hardmvs.com/images/IMaze/...stalledRSM.jpg

    But with no evidence for such an interface this was mere speculation. Until I came across an ebay auction for a Puzz Loop 2 board. Take a look at the auction picture:

    http://www.boomspeed.com/nassivera/PuzzLoop2.jpg
    (the spinner option can also be seen on the instruction sheet in the pic)

    What else can that small board be other than an optical interface? It's very similar to the IM one: Jamma male connector, a smaller connector for the spinner and it should also have a female Jamma connector that plugs onto the mobo although this can't be seen from this pic.
    Unfortunately I didn't win the auction so I don't have definite proof of what I'm saying.

    Anyone have any inputs on this? It would be cool if the optical interface actually existed and could be used with Eco Fighters as well...
    Last edited by MKL; 01-21-2004 at 06:43 PM.

  2. #2
    WWJCVDD?
    Zak's Avatar
    Join Date
    Sep 2001
    Location
    earth (uk)

    Posts
    353
    13 year bump! Did anyone figure this out?
    Yo.

  3. #3
    Kyo's Flame
    DanAdamKOF's Avatar
    Join Date
    Jun 2002
    Location
    Sunnyvale, CA http://www.twitch.tv/danadamkof

    Posts
    8,144
    I wonder if the JAMMA edge reads quadrature encoder sensor outputs on two button/stick inputs.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •