purple
Geese's Thug
- Joined
- Aug 7, 2007
- Posts
- 276
Hi...im planning to connect my hyper64 board to my scart tv...here is what i did...i just want to be sure that everything is ok..can anyone confirm or correct?
Code:
(Power Connector)
+--1---------\ (PSU) +-+----------+
| A--------\------------------+----- GND 1 2 |
| 2----------/ | 3 4 |
| B-------/ +-------------------+-+ |
| 3-----------\ |
| C----------\ |
| 4------------/-------------------- +5(11A) --------------------|
| D---------/ |
| 5----------------\---------------- -5(1A) |
| E--------------/ |
| 6---------------\ |
| F-------------/----------------- +12(2A) |
| 7 +----------------------------------+
| H |
| 8 | +---------------------+
| J | | |
| 9 | | 21 |
| K | | 20-------+ |
| 10 | | 19 | |
| L | | 18 | |
| 11 | +----------17 | |
| M +--(100-Ohm-Res)------16 | |
| 12------(500ohm/1kohm-Pot)--------------------------15 | |
| N-----(500ohm/1kohm-Pot)-------+ 14 | |
| 13------(500ohm/1kohm-Pot)-+ \ 13 | |
| P ------------------+ \ \ 12 | |
| 14---------------+ \ \ +---------------11 | |
| R \ \ \ 10 | |
| 15 \ \ \ 9 | |
| S \ \ \ 8 | |
| 16 \ \ +------------------7 | |
| T \ \ 6 | |
| 17 \ \ 5 | |
| U \ \ 4 | |
| 18 \ \ 3 | |
| V \ \ 2 | |
| 19 \ \ 1 | |
| W \ \ (SCART) | |
| 20 \ +-----------------------+ |
| X \ |
| 21 +-------------------------------+
| Y
| 22
| Z
| 23
| a
| 24
| b
| 25
| c
| 26
| d
+--27
+--- e
+--28
+--- f
(JAMMA)