retronerd
New Challenger
- Joined
- Apr 23, 2016
- Posts
- 68
That wasn't clear?
If i can remove 5c 6c 7c 8c 9c 10c
Or only 5c 10c and 6c?
That wasn't clear?
If i can remove 5c 6c 7c 8c 9c 10c
Or only 5c 10c and 6c?
AC5 through AC10, means AC5, AC6, AC7, AC8, AC9 and AC10.
Just like in the picture.
Thanks! when i do the stereo mod, can i still use the mono sound from the jamma connector?
even if i just use it on my crt tv?If you remove the amp and the caps, no.
I get som High annoying noise specially on the test screen if i dont have an cartridge inserted, can this be fixed?
Xian, you mentioned in another thread that if you use the same ground for audio and video, it can be noisy, so you like pull the audio and video ground from opposite ends of the board. Where do you recommend tapping audio and video ground from?
What about if I just want to use a standard Neo Geo 8-pin DIN for A/V? in that case, audio and video have to share ground. Is one then doomed to a noisy video signal?
Ive have only ground on pin 18 in the scart end no other pin.
An CRT TV European RGB.
I believe you just need to remove D5, that would disable the charging circuit effectively. Removing the rest of the components will not make it any more disconnected.