Results 1 to 25 of 78

Thread: The UniBios & IR-Maze thread.

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Divine Hand of the UniBIOS
    Razoola's Avatar
    Join Date
    Nov 2002
    Location
    Finland, Earth

    Posts
    4,619

    icon16.gif The UniBios & IR-Maze thread.

    Ok, thanks to the help of Michele Nassivera who has taken some time to get a Universe Bios rigged up to a MV-1C I now have the info to wire a IR Maze kit to _ANY_ MVS with joysticks ports. This is a first port of call, once everything is confirmed working it should be very easy to get a kit wired up to an AES also.

    I must point out first that still no one has given any feedback on if IR maze even works with v2.2. and no one has yet tried this to confirm that it works. Also the Unibios only communicates with the trackball and button parts of the P.C.B, everything related to the lights and air etc is simply not controlled.

    Ok, on to the info...

    The JAMMA section of the IR MAZE kit simply plugs into the MVS as it would on a MC-1B or 1C so that part is easy. The next step is the hard part but if you know how to use a soldering iron to make a lead then even this is easy. Basically there is a 8 pin connector on the IR P.C.B kit that normally plugs into the MV-1B or 1C. You wire this as follows.


    Code:
     
    CON1
    
    pin 1 - NC
    pin 2 - NC
    pin 3 - pin  9 of 2up joystick port
    pin 4 - pin  2 of 2up joystick port
    pin 5 - pin 10 of 2up joystick port
    pin 6 - pin  9 of 1up joystick port
    pin 7 - pin  2 of 1up joystick port
    pin 8 - pin 10 of 1up joystick port
    NOTE
    - Pin 1 is ground and may need connecting to any of the two (or both) joystick port grounds (pin 1 of both joystick ports) if the P.C.B dosn't take ground from the JAMMA.
    - Pins 3,4,5 probably don't need wiring up either but I just mention them because if they did, this is where they would need to go.

    Basically this is all that would be needed. All you need to do now is start the game and enable the trackball cheat and it should all work (fingers crossed).

    The next step to get this working on an AES is simply in theory. First you simply take all the JAMMA 1up and 2up joystick and buttons and wire them into the correct joystick ports. You will of course also need to wire the ground. Lastly I don't know what power the P.C.B runs on but of course youll need to get power into it from somewhere.

    It should be quite easy to make a custom P.C.B and trackball so the actual IR maze kit is not needed. Its a simple case of those 6 lines selecting what info is returned to the joystick inputs. I'm hoping someone will do this becuse it would be very easy to get a trackball working through 1 joystick port only instead of two that this IRmaze kit requires by default.

    I'm hoping some people are going to try this and give feedback.

    Raz
    Last edited by Razoola; 01-21-2006 at 10:54 AM.
    THE UNIVERSE BIOS ( MVS / AES, and now also for CD )
    www.universebios.com. Also on facebook, please like http://www.facebook.com/UniverseBios.

  2. #2
    OWES ROT MONEY! Verythrax's Avatar
    Join Date
    Nov 2003
    Location
    Campinas/SP, Brazil

    Posts
    4,548
    Excuse if I didn't get everything but... Playing IR with a conventional Neo Stick is a no no?
    Quote Originally Posted by The last message from Our Beloved Prophet NeoGumby (ABRIDGED VERSION)
    my time is short but i can hold the boob dredd off for some time

    enough to say remember djdd is a fool and an idiot who is everything this website is not

    it will never be the sort to fall to idiots like him

    people like you the believers and our B_U know the ability the strength there is out there a right way a good way to run things

    i stand for the good i stand for the classic the good times here make it here how you can

  3. #3
    Divine Hand of the UniBIOS
    Razoola's Avatar
    Join Date
    Nov 2002
    Location
    Finland, Earth

    Posts
    4,619
    Quote Originally Posted by Verythrax
    Excuse if I didn't get everything but... Playing IR with a conventional Neo Stick is a no no?
    There is an option in 2.2 to play it with a joystick too. I added joystick and trackball support.

    Raz
    THE UNIVERSE BIOS ( MVS / AES, and now also for CD )
    www.universebios.com. Also on facebook, please like http://www.facebook.com/UniverseBios.

  4. #4
    Basara's Blade Keeper
    MKL's Avatar
    Join Date
    Mar 2002
    Location
    -

    Posts
    3,681
    If I understand correctly you will always need some trackball interface, either the official one or a home-made one (following the schematics you posted time ago?). If one has a MV-1B or MV-1C with Unibios 2.2 and the official IM interface it will be plug and play. If one has a different motherboard he'll have to do that extra wiring from the interface to the controller ports. Correct?

  5. #5
    Divine Hand of the UniBIOS
    Razoola's Avatar
    Join Date
    Nov 2002
    Location
    Finland, Earth

    Posts
    4,619
    Quote Originally Posted by MKL
    If I understand correctly you will always need some trackball interface, either the official one or a home-made one (following the schematics you posted time ago?). If one has a MV-1B or MV-1C with Unibios 2.2 and the official IM interface it will be plug and play. If one has a different motherboard he'll have to do that extra wiring from the interface to the controller ports. Correct?
    Yes you are correct on all counts. Thinking about it, with the extra wiring you probably dont even have to wire up the ones which goto the 2up joystick port either. The ones for the 1up joystick port are needed though. I'll update the first post to mention this.

    Actually one _could_ wire up a trackball without the need of an interface. The problem would be that there would be no room for buttons unless you took the 8bit X and 8bit Y values and made them 7 bits each instead, that would allow for 2 buttons at the exspence of some trackball control smoothness. Then you could wire 7 bit X + 1 button + 1up start + 1up select to player 1 joystick port and 7 bit Y + 1 button + 2up start + 2up select to player 2 joystick port. This would then work once I added support for it to be wired like that in the bios.

    Basically the control pins of the 8 pin connector are either high or low so the actual interface isn't really that advanced, its simply a switch to control what bits are going to the joystick port. As there are 3 lines per port, in effect the joystick port can handle 8 different presets. A trackball and buttons only requires 3.

    If someone was to make one it could even be multi purpose as I'm sure some people would like to use it to make a mahjong controller also which basically works on the same principle... And the game paddle (pop n bounce)... And the 4 player joystick (kizuna) for that matter.

    Raz
    Last edited by Razoola; 01-21-2006 at 11:04 AM.
    THE UNIVERSE BIOS ( MVS / AES, and now also for CD )
    www.universebios.com. Also on facebook, please like http://www.facebook.com/UniverseBios.

  6. #6
    Mauru's Zoo Manager
    werejag's Avatar
    Join Date
    May 2005
    Location
    Oklahoma

    Posts
    2,874
    this seems interesting Razoola , i didnt understand your chart anywhere else i can look to see if i could build one?

  7. #7
    Larfleeze, Wielder of the Orange Light.
    formerly:
    Kenny Boy
    Kpj's Avatar
    Join Date
    Sep 2001
    Location
    Michigan

    Posts
    1,808
    Raz,

    Thanks for the update/info. I'll try IM on the AES shortly (via Phantom1)

    Kpj

  8. #8
    Basara's Blade Keeper
    MKL's Avatar
    Join Date
    Mar 2002
    Location
    -

    Posts
    3,681
    Quote Originally Posted by Razoola
    It should be quite easy to make a custom P.C.B and trackball so the actual IR maze kit is not needed. Its a simple case of those 6 lines selecting what info is returned to the joystick inputs. I'm hoping someone will do this becuse it would be very easy to get a trackball working through 1 joystick port only instead of two that this IRmaze kit requires by default.
    On the official interface I see 8 lines coming out of the FPGA and going to the Jamma connector to the pins that are normally used for P1 up/down/left/right/A/B/C/D (= P1 joy port). And the 4 buttons (but only 1 actually used?) of the official cab are on the pins normall used for P2 A/B/C/D (= P2 joy port). Wouldn't a home-made interface be supposed to do the same as the FPGA but using standard logic gates? If so, what joy port pin(s) would be used for the button(s) if the button pins on the same port are already used by 4 of the 8 trackball lines? Probably I'm confused...

  9. #9
    Divine Hand of the UniBIOS
    Razoola's Avatar
    Join Date
    Nov 2002
    Location
    Finland, Earth

    Posts
    4,619
    Quote Originally Posted by MKL
    On the official interface I see 8 lines coming out of the FPGA and going to the Jamma connector to the pins that are normally used for P1 up/down/left/right/A/B/C/D (= P1 joy port). And the 4 buttons (but only 1 actually used?) of the official cab are on the pins normall used for P2 A/B/C/D (= P2 joy port). Wouldn't a home-made interface be supposed to do the same as the FPGA but using standard logic gates? If so, what joy port pin(s) would be used for the button(s) if the button pins on the same port are already used by 4 of the 8 trackball lines? Probably I'm confused...
    Yes IR maze only uses 1 button but it can handle 4 like you say. If you copied the current interface exactly you would need to wire to 1up and 2up ports (1up for trackball 2up for buttons).

    If your going to build a custom controller pcb though I would more advise not to copy exactly what the IR controller does but rather do it so everying for the trackball and buttons goes through one controller port only. This would allow for using the controller not just for IR maze but for the other types of controllers like I mentioned before (2 sticks in one joy port for 4 player game). It would also look alot neater. I would need to update the unibios to accept this configuration but that part is easy to do.

    If you picture in your head 8 banks of 8 buttons. Then a switch that has 8 possible positions, thats one position for each bank. Basically only one bank of 8 buttons is sent to the controller inputs (the one that corrosponds to the switch position). As soon as the switch position is changed the new bank corrosponding to the new position is sent only.

    The switch is basically 3 lines from the 1up joystick port (each are either low or high). That give you 8 possible settings from all low to all high (0 to 7). What the Bios does is set the required switch for the bank it wants to read, wait a short time and finally read the joystick inputs.

    I sopose all this is getting ahead of ourselves though, I still need to know if it works with the current IR controller.

    Raz
    THE UNIVERSE BIOS ( MVS / AES, and now also for CD )
    www.universebios.com. Also on facebook, please like http://www.facebook.com/UniverseBios.

  10. #10
    Divine Hand of the UniBIOS
    Razoola's Avatar
    Join Date
    Nov 2002
    Location
    Finland, Earth

    Posts
    4,619
    bump
    THE UNIVERSE BIOS ( MVS / AES, and now also for CD )
    www.universebios.com. Also on facebook, please like http://www.facebook.com/UniverseBios.

  11. #11
    Tech Support Moderator

    Join Date
    Aug 2000
    Location
    Dunedin, FL

    Posts
    1,654
    Ahh, an IM thread - nice I've stuck the thread for you.

    Has Kenny reported his testings yet? If not, and if he can't get you the info, I'll hook mine up and give it a go.

    Jeff

  12. #12
    Divine Hand of the UniBIOS
    Razoola's Avatar
    Join Date
    Nov 2002
    Location
    Finland, Earth

    Posts
    4,619
    Quote Originally Posted by JMKurtz
    Ahh, an IM thread - nice I've stuck the thread for you.

    Has Kenny reported his testings yet? If not, and if he can't get you the info, I'll hook mine up and give it a go.

    Jeff
    No he hasen't said anything yet. MKL is going to look at this also, hes just waiting on his v2.2 unibios to arrive still.

    I'm sure things will get intresting soon with this thread.

    Raz
    THE UNIVERSE BIOS ( MVS / AES, and now also for CD )
    www.universebios.com. Also on facebook, please like http://www.facebook.com/UniverseBios.

  13. #13
    Timid Neo Newbie

    Join Date
    May 2010
    Location
    cali

    Posts
    4

    Anyone please help me out.......

    i have windjammers for my neogeo BUT the time limit and the point limit is WAY to short is there any bios that will help me extend the GREAT game i mean its over WAY to fat

  14. #14

  15. #15
    Timid Neo Newbie

    Join Date
    May 2010
    Location
    cali

    Posts
    4

    hi

    that did nothing

  16. #16
    JammaNationX
    Xian Xi's Avatar
    Join Date
    Dec 2005
    Location
    Waipahu, Hawaii

    Posts
    27,810
    Sorry, Japan is for a higher score limit. If you want to change time limit go into your soft dip settings via your test button. If you have an AES you need a unibios and set it to arcade mode then change the softdips or use the cheat menu.

  17. #17
    Timid Neo Newbie

    Join Date
    May 2010
    Location
    cali

    Posts
    4

    hi

    Quote Originally Posted by Xian Xi View Post
    Sorry, Japan is for a higher score limit. If you want to change time limit go into your soft dip settings via your test button. If you have an AES you need a unibios and set it to arcade mode then change the softdips or use the cheat menu.
    that is what i want a higher score limit past 15 and a higher time limit whats the latest uni-bios?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •