- Joined
- Feb 27, 2004
- Posts
- 3,225
Hi everyone,
I just received a pair SNES-to-DB15 adapter from Arcadeforge, one of those things that allows you to use a SNES pad on a DB-15 supergun/neogeo.
http://arcadeforge.net/Supergun-MAK...-Gamecontroller-Adapter::133.html?language=en
I'm using it with a MAK strike supergun, from same seller, which so far has been rock solid and works flawlessly with a DB-15 neogeo cd pad.
now thing is, if I put the SNES adapter on player one port, button C is not registered, BUT, if I put the same adpater on player 2 port, everything works.
As mentioned, 1P port works perfectly with all buttons with a neogeo pad and I even used a wire connected to ground on one end, to test the button C pins from the jamma connector, all the way to the DB-15 connector on the SNES adapter PCB... input is registered correctly this way.![spock :spock: :spock:](/ubb/graemlins/spock.gif)
So, sounds there is something I may have to investigate for which player 1 port is different from player 2 port!? Sounds a problem with the adapter but why only on one port!? Also, both adapters are showing the same issue...I doubt both are faulty.
Of course I contacted the seller, he is available to troubleshoot but communication is somehow slow and he seems puzzled as much as I am.
Any idea?
Thanks!
Massi
I just received a pair SNES-to-DB15 adapter from Arcadeforge, one of those things that allows you to use a SNES pad on a DB-15 supergun/neogeo.
http://arcadeforge.net/Supergun-MAK...-Gamecontroller-Adapter::133.html?language=en
![snes_strike_05.jpg](http://1.bp.blogspot.com/-EPoyPOoWajA/VDOF1bXeziI/AAAAAAAAI3k/ysUrQFPiST8/s1600/snes_strike_05.jpg)
I'm using it with a MAK strike supergun, from same seller, which so far has been rock solid and works flawlessly with a DB-15 neogeo cd pad.
now thing is, if I put the SNES adapter on player one port, button C is not registered, BUT, if I put the same adpater on player 2 port, everything works.
As mentioned, 1P port works perfectly with all buttons with a neogeo pad and I even used a wire connected to ground on one end, to test the button C pins from the jamma connector, all the way to the DB-15 connector on the SNES adapter PCB... input is registered correctly this way.
![spock :spock: :spock:](/ubb/graemlins/spock.gif)
So, sounds there is something I may have to investigate for which player 1 port is different from player 2 port!? Sounds a problem with the adapter but why only on one port!? Also, both adapters are showing the same issue...I doubt both are faulty.
Of course I contacted the seller, he is available to troubleshoot but communication is somehow slow and he seems puzzled as much as I am.
Any idea?
Thanks!
Massi