Green Beret
Fio's Quartermaster
- Joined
- Feb 27, 2013
- Posts
- 498
I received an Extron Crosspoint to avoid connect and disconnect any longer with my setup but I can’t really make it work.
Cable from Extron to OSSC (male scart to BNC) is fine because it works as line out from the PVM to OSSC.
I have installed a sync stripper to the female scart -> BNC but maybe something is wrong with what I have connected. Take a look at the picture if something isn’t right. Or it could be a faulty Extron Crosspoint as the seller couldn’t test it if works. When I power it up it makes a test and lights up all buttons for one second. All buttons also behave as the unit is working.
Thanks in advance.
EDIT: After applying the sync stripper in the female scart, nothing will sync with my PVM either.
As you can see in the picture orange goes to sync, purple to ground, yellow is sync in, Black is coming from 5v, maybe is something wrong with the power pin?
Cable from Extron to OSSC (male scart to BNC) is fine because it works as line out from the PVM to OSSC.
I have installed a sync stripper to the female scart -> BNC but maybe something is wrong with what I have connected. Take a look at the picture if something isn’t right. Or it could be a faulty Extron Crosspoint as the seller couldn’t test it if works. When I power it up it makes a test and lights up all buttons for one second. All buttons also behave as the unit is working.
Thanks in advance.
EDIT: After applying the sync stripper in the female scart, nothing will sync with my PVM either.
As you can see in the picture orange goes to sync, purple to ground, yellow is sync in, Black is coming from 5v, maybe is something wrong with the power pin?
Last edited: