j.m.ratkos
n00b
- Joined
- Jan 31, 2011
- Posts
- 6
I was helping a friend by changing all of the caps, and like an idiot, I removed the 2 caps without noting the polarity or values of the positions of both caps on the PL241 board (I assumed I had the same board shown on the wiki page, but that proved wrong.
the photo shows the positions of both caps and I know that one is 1uF and the other 4.7uF, but I need to know which cap goes where and the orientation of the negative lead for both caps
thank you in advance.
the photo shows the positions of both caps and I know that one is 1uF and the other 4.7uF, but I need to know which cap goes where and the orientation of the negative lead for both caps
thank you in advance.