Hello comrades, I just made the bypass mod for AES with board 3-5 because I had a chess board in the image, now I don't have that annoying failure, but I have a question, I soldered the sync on pin 10 and saw that other guides did it. They soldered at pin 11. Pin 10 according to the scheme is c sync in and pin 11 is c sync out. I am confused, in the 2 pins I am doing well, but I want the best image quality, I have the cable from the store retro gaming cables. Thank you! and greetings to all
This is my bypass mod on board 3-5
here indicate pin 11
https://www.retrorgb.com/aes-rgb-bypass.html
and here pin 10
http://www.mmmonkey.co.uk/snk-neo-geo-aes-rgb-bypass/
This is my bypass mod on board 3-5
here indicate pin 11
https://www.retrorgb.com/aes-rgb-bypass.html
and here pin 10
http://www.mmmonkey.co.uk/snk-neo-geo-aes-rgb-bypass/
Last edited: