- Joined
- Jan 28, 2009
- Posts
- 4,226
If this needs to get moved to gen tech support or the Hyper subforum, totally cool. I started here since it's tech and its SNK hardware
https://imgur.com/gallery/bWCfkEp
I am going to be converting a Beast Busters Second Nightmare PCB from the AMP style connectors seen in the gallery to a JAMMA fingerboard (pulling the appropriate signals needed from the connectors for video / power / coin / etc) for supergun play. The board in the gallery is a REV 2 fighting board FYI...so JAMMA isn't avail on the shooting board.
I have the pinouts and schematics needed for the project (thanks NeoTurfMasta and JAMMA Nation X), but I want to do it non destructively. Sure I could cut the wiring harnesses behind the connectors on the board and solder to them, but that's irreversible, and I'd like to avoid that.
These connectors control everything but the X/Y stick inputs for the crosshair, but since my mobo hasn't arrived yet (the photos are of a Rev 2 fighting board, but the connectors are identical) I will leave finding those connectors to a stage two quest. First things first is power, video, and audio.
If anyone can help me I'd owe you. Ive tried Digikey and Mouser, and while I have gotten close, nothing quite matches. I believe the might be part of the TE AMP CONNECTOR line, but that could be wrong? The front facing connectors seen in the photos are female, so I'd be looking for male mating parts.
Note : obv the 4 pin +12V and ground connector is larger than the rest of the connectors, so that is a different variant. I tossed photos up of that as well. Additionally I have thought about trying to find the PCB side connectors and making a harness via that connector, but I wanted to try the front mounted (and easier to connect) connectors first.
help me find these and be my internet hero lol
https://imgur.com/gallery/bWCfkEp
I am going to be converting a Beast Busters Second Nightmare PCB from the AMP style connectors seen in the gallery to a JAMMA fingerboard (pulling the appropriate signals needed from the connectors for video / power / coin / etc) for supergun play. The board in the gallery is a REV 2 fighting board FYI...so JAMMA isn't avail on the shooting board.
I have the pinouts and schematics needed for the project (thanks NeoTurfMasta and JAMMA Nation X), but I want to do it non destructively. Sure I could cut the wiring harnesses behind the connectors on the board and solder to them, but that's irreversible, and I'd like to avoid that.
These connectors control everything but the X/Y stick inputs for the crosshair, but since my mobo hasn't arrived yet (the photos are of a Rev 2 fighting board, but the connectors are identical) I will leave finding those connectors to a stage two quest. First things first is power, video, and audio.
If anyone can help me I'd owe you. Ive tried Digikey and Mouser, and while I have gotten close, nothing quite matches. I believe the might be part of the TE AMP CONNECTOR line, but that could be wrong? The front facing connectors seen in the photos are female, so I'd be looking for male mating parts.
Note : obv the 4 pin +12V and ground connector is larger than the rest of the connectors, so that is a different variant. I tossed photos up of that as well. Additionally I have thought about trying to find the PCB side connectors and making a harness via that connector, but I wanted to try the front mounted (and easier to connect) connectors first.
help me find these and be my internet hero lol
Last edited: