- Joined
- Aug 25, 2010
- Posts
- 624
I just hooked up a Golden Axe 2: RODA board I had picked up awhile back and sadly I'm not getting any sound...
I tried the board in three different cabs cabinets, no sound on any of them...so I'd have to assume the problem is with the board itself.
I accessed the test menu, cleared the back up data and did a RAM/ROM check and everything tested "good". I didn't get any sound under the sound test option either. I next adjusted the sound pot on board, didn't seem to have any effect either...
I'm getting +5.3v and +11.7 at the jamma harness...
Any ideas???
I tried the board in three different cabs cabinets, no sound on any of them...so I'd have to assume the problem is with the board itself.
I accessed the test menu, cleared the back up data and did a RAM/ROM check and everything tested "good". I didn't get any sound under the sound test option either. I next adjusted the sound pot on board, didn't seem to have any effect either...
I'm getting +5.3v and +11.7 at the jamma harness...
Any ideas???