Wow! Didn't notice the fix for Riding Hero slow attract mode on AES mode with the new firmware! I didn't even consider this to be an issue despite having noticed the problem when NeoSD was released months ago, as it also occurs in NeoRAGE X emulator on AES mode and has even been reported to take place on real hardware (AES console + original cart) by some users.
In addition, analyzing the new NeoBuilder version, I've seen that 'Samurai Shodown II (Korean Version alternate)' and 'Robo Army (alternate)' (both of them were previous extras from the famous post #44, handmade neo-converted) have been added to the already reported new games (RB FF1 Korean, KOF99 Korean, Puzzle de Pon! with its own snapshot, etc.).
Great work, NeoSD Team! Glad to see it's now a public release! :-)
Shells arrived - they are awesome! Great works guys =D
Two different ways I fitted them, the one I use with my 1FZ I've split the label with a gillotine, the other label I just mounted as normal.
View attachment 45470View attachment 45471
Really UNHAPPY with the shell just received. It's a bad factory made. Impossible to close the shell with the NeoSD in :O !! ?
My NeoSD was in a original MVS Game shell (with a hole made for the SD) and enter perfectly. But NOT AT ALL with this free shell !!
Also the plastic to hide between the pins is not well done because it not center the pins => Impossible to push the cartridge in my MVS.
I don't know if neosd send to us a different revision of the shell for free shells but it's not made right at all.
So i take out my neo SD from the free shell and use it again in my MVS Original Shell...
PS : I have try everything to close the shell and get the pins aligned center => Impossible the shell is bad factory made.
Really UNHAPPY with the shell just received. It's a bad factory made. Impossible to close the shell with the NeoSD in :O !! ?
My NeoSD was in a original MVS Game shell (with a hole made for the SD) and enter perfectly. But NOT AT ALL with this free shell !!
Also the plastic to hide between the pins is not well done because it not center the pins => Impossible to push the cartridge in my MVS.
I don't know if neosd send to us a different revision of the shell for free shells but it's not made right at all.
So i take out my neo SD from the free shell and use it again in my MVS Original Shell...
PS : I have try everything to close the shell and get the pins aligned center => Impossible the shell is bad factory made.
What a way to say that you are not capable to put the pcbs on the shell ... its 3 pieces puzzle, not that hard ...
What a way to say that you are not capable to put the pcbs on the shell ... its 3 pieces puzzle, not that hard ...
it seems we built one shell where its impossible to put the pcbs inside only for you, we sent "good ones" to the rest of the customers ...
Honestly, i canエt believe what i am reading
I like your use of ellipses...
Breaks up a sentence eh?
xROTx
PS. Don't mind me... I'm just browsing and relaxing for the time being...
I still havent mastered English, Rot.
But i know enought to notice someone complaining instead of asking for help ...
I know perfectly how to place MVS pcb into cartrigde. But in the free shell the cartridge can't be closed Left side a piece of plastic block
And also even if i force the pin are not centered so it not fit in the MVS.
Even in a 161 in 1 cartridge i can close the shell with NeoSD in.
But in your shell impossible.
I have done exactly like the photos @neosd,
the left side (sd card side) block.
I have done exactly like the photos @neosd,
the left side (sd card side) block.
The piece of plastic to hide between the pins also block on the left.
Photos uploaded here : http://tgames.fr/tgames/neosd
I'm not stupid with mounting the shell, i really think mine had a problem.
Photos uploaded here : http://tgames.fr/tgames/neosd
I'm not stupid with mounting the shell, i really think mine had a problem.