Wolfie79
Quiz Detective
- Joined
- Sep 17, 2011
- Posts
- 86
Hey there!!
I recently bought an MVS A 2 lot MV2FS, having some big space problem at home, I`ll have to part from my Custom Built Cab with a 25inch CRT and a MV1F in it, so I decided to still keep an MVS (cant live without neogeo ffs!) but a consolized one, now first problem I have is to do the job myself since I am not very very skilled at soldering, however with patience + loooots of coffee i`m sure i`ll manage somehow, only issue is after lots of googling around and stuff, I cannot find a simple step by step tutorial to do the job, after all i`m no electrician and not very technical in hardware, when it comes to dry joints and bad chips etcl (i`m into media and software not hardware ) so any clues what sort of tutorials I should be looking for?
Now this thing "was" supposed to be consolized however there`s so much work involved i`m just doing everything from start i.e. from scratch because its an mess, but before I start working my way around for styles, case shape, connectors and that stuff, i`ll have to sort myself on the glitchy graphics 1st. any hints??
btw here is a video from youtube of what it is doing, placed the MV2F in my cab (just switching jamma connector from 1 board to another), this way it should work fine, only thing it has a Uni Bios installed v2.0, if I boot it up with no gamecart the picture is fine, also if you notice still images are also fine too, and btw the board was in a MESS but I gave it a good clean with ethanol spirit and now its shiny again and it doesnt look that bad (i.e. scratched or cracked etc)
A) no game cart inserted = http://www.youtube.com/watch?v=6x5XPybZFhg&feature=youtu.be
B) Top hunter MVS cart inserted = http://www.youtube.com/watch?v=aigskkUDwTE&feature=youtu.be
Btw i`m from Malta (europe) and no one around on this island even knows what an MVS is
P.S. I got 9 more MVS gamez and all do the same so its def not a game cart issue or contacts, also afai can remember I tried both slots, will try slot 2 again right now (because 1st time I tried slot 2 I think I did not clean the contacts and board yet but i`m not its another issue not just that!)
I recently bought an MVS A 2 lot MV2FS, having some big space problem at home, I`ll have to part from my Custom Built Cab with a 25inch CRT and a MV1F in it, so I decided to still keep an MVS (cant live without neogeo ffs!) but a consolized one, now first problem I have is to do the job myself since I am not very very skilled at soldering, however with patience + loooots of coffee i`m sure i`ll manage somehow, only issue is after lots of googling around and stuff, I cannot find a simple step by step tutorial to do the job, after all i`m no electrician and not very technical in hardware, when it comes to dry joints and bad chips etcl (i`m into media and software not hardware ) so any clues what sort of tutorials I should be looking for?
Now this thing "was" supposed to be consolized however there`s so much work involved i`m just doing everything from start i.e. from scratch because its an mess, but before I start working my way around for styles, case shape, connectors and that stuff, i`ll have to sort myself on the glitchy graphics 1st. any hints??
btw here is a video from youtube of what it is doing, placed the MV2F in my cab (just switching jamma connector from 1 board to another), this way it should work fine, only thing it has a Uni Bios installed v2.0, if I boot it up with no gamecart the picture is fine, also if you notice still images are also fine too, and btw the board was in a MESS but I gave it a good clean with ethanol spirit and now its shiny again and it doesnt look that bad (i.e. scratched or cracked etc)
A) no game cart inserted = http://www.youtube.com/watch?v=6x5XPybZFhg&feature=youtu.be
B) Top hunter MVS cart inserted = http://www.youtube.com/watch?v=aigskkUDwTE&feature=youtu.be
Btw i`m from Malta (europe) and no one around on this island even knows what an MVS is
P.S. I got 9 more MVS gamez and all do the same so its def not a game cart issue or contacts, also afai can remember I tried both slots, will try slot 2 again right now (because 1st time I tried slot 2 I think I did not clean the contacts and board yet but i`m not its another issue not just that!)