MV-2F Headphone Pinout

Hi, I have the MV-2F board and wanted to know the pinout of the underside of the headphone jack. The pic below shows how Broken soldered his if anyone knows which pins are L, R, and Ground please let me know.

Thanks again,
Austin

Does anybody know?

In the pic you posted right is where the red wire go (closer to the PCB corner) and left where the white wire go.

I've noticed that on the home system the channels are often inverted and wonder if this also happens on the 2-slot. So better double check as I suggest here (under point 1):

http://www.neo-geo.com/forums/showpost.php?p=1221208&postcount=2

Is the headphone connector still attached? If so just get a RCA->headphone Cable. That way you won't have to hack anything.