Supergun audio questions...

I recently decided that I had too much money on my hands and that I was going to build a Supergun as result. Anyway, the only real question I have about it is about the audio output. If I simply used a 56 pin JAMMA harness, I would have to install a speaker into the casing for the audio, since the signal is already amplified from the PCB, right? If that's the case, is there any way to install standard audio jacks (or to deamplify the signal) on a Supergun without using a specialized Supergun board? It's not a big deal if it can't be done, because I don't mind installing a couple of speakers on the enclosure, but it would be nice to have the video and audio coming from the same source. Anyway, if any of you guys have any answers to my question, I would love to hear them. Thanks!

You can with an attenuation circuit.

link:
http://neo-geo.com/forums/search.php?searchid=112784

Orochi Iori Y said:

You can with an attenuation circuit.

link:
http://neo-geo.com/forums/search.php?searchid=112784

Click to expand...

Ah, the Search feature, how I often forget about you.

Thanks for your help.

depending on which MVS board set, you may like to tap off the headphone outputs.