Hyper 64 power questions

D

DarkHuman

Geese's Thug
Joined
May 20, 2004
Posts
270
So my hyper 64 came in today, and I know all about hooking up the speakers, and I even checked out hardmvs.com to get a walkthrough for adding the -5V to the jamma connector, but what do I hook the "power" black and red wires up to?

I don't see anywhere to hook up that to the power.....HELP!

Thanks!
 
Last edited:
Poonman

Poonman

macebronian
15 Year Member
Joined
Jul 29, 2004
Posts
9,961
*Ahem*

At the risk of sounding like a redundant, inept asswipe: Rev 1 or 2?
 
chris1

chris1

POCKETBIKE NUT,
Joined
Oct 18, 2002
Posts
10,830
DarkHuman said:
So my hyper 64 came in today, and I know all about hooking up the speakers, and I even checked out hardmvs.com to get a walkthrough for adding the -5V to the jamma connector, but what do I hook the "power" black and red wires up to?

I don't see anywhere to hook up that to the power.....HELP!

Thanks!
Click to expand...


Depends on what your putting it in..

You hook up the "power Red" to the +5V on the power supply and the Ground "Black" to the Ground on the Power supply..

If you can.......Depends on the power supply you have..
........... if it's going to be easy or not....
 
D

DarkHuman

Geese's Thug
Joined
May 20, 2004
Posts
270
Thanks to chris1. Checked the old posts and riped the back of my mv25 open. Thanks again. just need 2 jamma pins and i'm up and running!!!
 
You must log in or register to reply here.
Top