Help I need a supergun schematic

Im going to build a supergun and need the schematics .I dont have autocad or anything like that so would need it to be a file i could view in word or somthing.Please help ive serched everywhere but cant find one

There is no scamatic for a super gun as such unless you are refering to RGB to Svideo/compasite conversion. Basically simply look at the JAMMA pinpout for all the wiring info you need.

Raz

Razoola is right. You only need the wiring for a JAMMA harness (or whatever kind you want). The actual supergun itself can look like anything you want, provided you can build it.

I have seen on ebay some one selling ,I think in germany,a supergun made on a pcb with the harness and joystick ports solderd to it.I want to make some of these pcbs.I have another question?if your only gona bee using the supergun with a mvs-1 whitch i think has joystick ports do you not need to wire them in?

Cheers for the help I dont know much atall when it comes to all this.

here's my diaHam (named after the Ham shapped rca jacks)


it's for mini one slots and multislot boards mvs boards.....using the sc200 powersupply.

improvise on your own for a full jamma psu setup with -5v

all you need is the controller to harness wiring... and remember that the 2 coin buttons can be left out if you wire the coin insert to the select button on your controllers Also, I use a surge protector, but someone may be able to help you with adding fuses to this if you would like.



here's what the big spots on the harness are: (1 wire to 4 pins)





love that diaHam

you can search for my "supergun layout" thread to find many questions and answers about this....

a DPST or a SPST power switch?

for my layout...

and neo style without -5v...


dual pole single throw

1 pole for +5v and 1 pole for +12v