Jameco SC200 pin out Question

S

sonofx51

If you're even THINKING about TRADING with this us

Joined

Sep 8, 2000

Posts

436

• Mar 18, 2004

• #1

ok I am looking at the back of the jameco and I see the pin out but is the pin out like looking at the male end of the cable or is it like looking in from the inside out?

 

NGT

J. M Club, ,

20 Year Member

Joined

Jul 20, 2002

Posts

4,762

• Mar 18, 2004

• #2

just like looking at the pins you solder to..


+5, +12, G,G,G

..................GND.................
......+12v................GND......

..+5v...........................GND...

 

MKL

Basara's Blade Keeper

20 Year Member

Joined

Mar 8, 2002

Posts

3,686

• Mar 18, 2004

• #3

hmmm...3 grounds and just one 5V? I'd turn one of those gnds into another 5V, that would be better.

 

NGT

J. M Club, ,

20 Year Member

Joined

Jul 20, 2002

Posts

4,762

• Mar 18, 2004

• #4

Loads of people use these and they work fine

 

MKL

Basara's Blade Keeper

20 Year Member

Joined

Mar 8, 2002

Posts

3,686

• Mar 18, 2004

• #5

Depends on what you're using it for. For boards that draw all the juice the PSU can output, 2 wires for 5v will always be better than one...

 

NGT

J. M Club, ,

20 Year Member

Joined

Jul 20, 2002

Posts

4,762

• Mar 18, 2004

• #6

^^true.....mini one slots and multi slots work fine...at least for me with single and 4 slot....as well as with my pgm and cps2 setup...

but...that's all I have used these for personally...

other boards or games may/do need more then this little external one...can put out.

 

S

sonofx51

If you're even THINKING about TRADING with this us

Joined

Sep 8, 2000

Posts

436

• Mar 18, 2004

• #7

Thanks guys! I appreciate the help, I am going to use it for a pgm board, and possibly and atomis wave, if my hdtv wont display its vga output.

 

NGT

J. M Club, ,

20 Year Member

Joined

Jul 20, 2002

Posts

4,762

• Mar 18, 2004

• #8

and possibly and atomis wave

Click to expand...

I don't know if that will work for the AW....but it runs a pgm just fine.

 

norton9478

So Many Posts
No Time
For Games.

20 Year Member

Joined

Oct 30, 2003

Posts

34,075

• Mar 18, 2004

• #9

I have used the SC 200 successfully with an MV-1 and many jamma boards.........

I guess if you were to use it with speakers rather than a at circuit, it might not be powerfull enough.

THe only boards that should have a problem with the SC 200 are ones that require a -5v to power an audio amp (Killer Instinct, CPS II, Mortal Combat) and boards that have some type of optical drive.