Monitor Sync question

I'm considering buying a new moniter for my cabinet and I asked the selling company for the pin outs and they replied with this:-

RED WIRE =Red input signal
GREEN WIRE = Green input signal
BLUE Wire = Blue input signal
BLACK WIRE = GROUND
YELLOW = H-SYNC
WHITE =V-SYNC
If you join the yellow and white together the monitor will accept
composite sync.

So for my JAMMA loom am I right in assuming I will have to join the yellow and white together?
Cheers Paul

I think you just leave the white disconnected and use the yellow for H sync..

Riipps said:

I'm considering buying a new moniter for my cabinet and I asked the selling company for the pin outs and they replied with this:-

RED WIRE =Red input signal
GREEN WIRE = Green input signal
BLUE Wire = Blue input signal
BLACK WIRE = GROUND
YELLOW = H-SYNC
WHITE =V-SYNC
If you join the yellow and white together the monitor will accept
composite sync.

So for my JAMMA loom am I right in assuming I will have to join the yellow and white together?
Cheers Paul

Click to expand...

Yes. JAMMA uses composite sync. The Yellow and White wires form the monitor will both connect to the single JAMMA composite sync wire.

Cool nice one!