Primal Rage...

L

lill-c

Dodgeball Yakuza
Joined
Oct 22, 2003
Posts
625
I picked up a Primal Rage PCB this weekend. I hooked it up and it works but the monitor has alot of snow on it. It has some jamma harness filter on it before the main PCB could that be doing it? I left my cam at home, I will go home at lunch to get it so I can post the pics of the PCB.
 
norton9478

norton9478

So Many Posts
No Time
For Games.
20 Year Member
Joined
Oct 30, 2003
Posts
34,075
I know that the RGB out of the Primal Rage PCB is different than most jamma RGB's... But I don't think that it should make much of a difference on a CAB....
 
R

Reznor007

Host for Orochi
Joined
Apr 10, 2003
Posts
755
The board has an impedence jumper per color channel, you might try changing its position. The filter PCB should work fine, but you can remove it to see if it helps.
 
L

lill-c

Dodgeball Yakuza
Joined
Oct 22, 2003
Posts
625
I saw those jumpers and wonderd about them. Right now they are set at low impedence.
 
L

lill-c

Dodgeball Yakuza
Joined
Oct 22, 2003
Posts
625
DSC00877.jpg
 
L

lill-c

Dodgeball Yakuza
Joined
Oct 22, 2003
Posts
625
Now can some one help with the button pin outs? Is there another harness for the other buttons?
Thanks
 
R

Reznor007

Host for Orochi
Joined
Apr 10, 2003
Posts
755
There are 4 buttons to this game. The normal JAMMA buttons 1-3 are most of them, and the normal Start button is the other. Yes, the start button is also one of the main gameplay buttons for this one :)
 
You must log in or register to reply here.
Top