4 Slot Red-Black Wire Question..
- Thread starter chris1
- Start date
ttooddddyy
PNG FTW,
- Joined
- Nov 29, 2001
- Posts
- 8,335
One of my MVH-6 boards has it and the other doesnt, so its not essential imho. The 5 volts otherwise connects via the PCB mounted plugs/sockets- this just beefs up the GND & 5 volts connection between top and bottom boards.
Maybe the MVH-6 has this added on later production runs ?
Maybe the MVH-6 has this added on later production runs ?
chris1
POCKETBIKE NUT,
- Joined
- Oct 18, 2002
- Posts
- 10,830
ttooddddyy said:
Two of my 4 Slot boards don't have it or the location for it..
Another 4 slot board I have has it .
A forth 4 Slot board I have the has the location for it but the wire is missing..
The board works fine though..
Do you think I should make something up...just to be safe..?
ttooddddyy
PNG FTW,
- Joined
- Nov 29, 2001
- Posts
- 8,335
chris1 said:
It wouldnt do any harm, SNK obviously thought it was necessary at some stage and for some reason.
chris1
POCKETBIKE NUT,
- Joined
- Oct 18, 2002
- Posts
- 10,830
ttooddddyy...
I was looking at the various PCBs I have around and found out that some of them have the same Black & Red wire connecting plug../that I can use as a replacement..
One board for instance that has it is Victory Road.
I figured I'd update my thread with this info just incase someone needs this info and uses the search engine.
I was looking at the various PCBs I have around and found out that some of them have the same Black & Red wire connecting plug../that I can use as a replacement..
One board for instance that has it is Victory Road.
I figured I'd update my thread with this info just incase someone needs this info and uses the search engine.
ttooddddyy
PNG FTW,
- Joined
- Nov 29, 2001
- Posts
- 8,335
If its there use it
Some of the early SNK boardshave it like Chopper 2, thats a 3 board set
Some of the early SNK boardshave it like Chopper 2, thats a 3 board set
TheGreenMachine
Geese's Thug
- Joined
- Jul 21, 2003
- Posts
- 271
2 board sets have them as well. I've got a Lee Trevino's Fighting golf board set and its got one of those jumpers at both the back and front of the board.