Test Cross Hatch

megageoff76

Crazed MVS Addict
Joined
Sep 2, 2003
Posts
142
Can anyone offer any suggestions here please.

When I go into the test cross hatch to adjust my game picture, the horozontal lines are slanted down to the left slightly a few degrees. Everything else on the monitor is perfect, just the picture is on a bit of an angle.

Nothing to major, just want it to be set right. Ive played with all the adjustments i can see on the monitor adjustment etc but cant see anything that could correct this.

Is there any easy adjustment to fix this, or is this something to do with the tube and best left to the experts?

thanks guys
 

ttooddddyy

PNG FTW,
Joined
Nov 29, 2001
Posts
8,335
The deflection yoke needs to be rotated slightly, there is a clamp that holds the yoke tight on the crt neck, after loosening slightly the yoke can be rotated to obtain correct picture geometery. Best left to someone familiar with working on this type of equipment, as there are very high voltages around the horizontal output/ scanning circuitry.

monitor2.jpg
 

megageoff76

Crazed MVS Addict
Joined
Sep 2, 2003
Posts
142
Thanks mate, I had a sneaky suspicion that it was going to be you who had the answer.

much appreciated.
 
Top