Does anybody know amps needed for the atomiswave........

First of all, I don't know much about this stuff..... so bare with me...


I have two power supplies....

one: +12v (1A) +5v (5A)

two: +12v (3A) +5v (15A)


I have been told that then Naomi needs +12v (2A) +5v (10A)


But I don't know about the atomiswave........ and don't want to mess anything up..


Again, if these numbers are all screwed looking and way off....

Anyone that knows something more than I do about this,lol... could probably what the numbers around so they look right....

Anyways......

Does anybody know what (guessing on wording -->) the rail draw is for the atomiswave?

And which power supply would you recommend? And which fuses would be the best to use?

Use the higher rated power supply. It won't damage it, since the machine determines what amps are supplied, not the power supply. The power supply lists its maximum current draw, if you go over that it will probably blow the fuse in the power supply.

As for the specific amounts it draws, I have no idea.

I do not know the exact numbers, I know for a fact that it is less then a Naomi system

if you go over that it will probably blow the fuse in the power supply.

Click to expand...

Will it damaged the atomiswave? Or just the power supply?

It would only blow the fuse. Replace the fuse and it would work again. It shouldnt damage the power supply or PCB.

The game will draw as much amps as it needs, so dont worry about having too many amps. Having more is better than not having enough.

Okay thanks!