Perfect 360° Joystick into a candy cab

iamrandyray

Armored Scrum Object
Joined
Mar 10, 2001
Posts
259
is it hard to install Perfect 360° Joystick into a candy cab
i have a super neo 29, i want to put in those stick, but i read that they need more power
how do i do it?
thanks
 

Yodd

Iori's Flame
20 Year Member
Joined
Feb 7, 2002
Posts
8,220
iamrandyray said:
is it hard to install Perfect 360° Joystick into a candy cab
i have a super neo 29, i want to put in those stick, but i read that they need more power
how do i do it?
thanks

The Perfect 360's require power to be ran to them since them are electronic. You will have to run a +5 volt line to them to power them. You should be able to pull it staight from the Jamma Harness or from the power supply.


That is if they fit in the Candy. I dunno if they would fit though...Maybe someone else can confirm this.
 

chris1

POCKETBIKE NUT,
Joined
Oct 18, 2002
Posts
10,830
Re: Re: Perfect 360° Joystick into a candy cab

broken said:
The Perfect 360's require power to be ran to them since them are electronic. You will have to run a +5 volt line to them to power them. You should be able to pull it staight from the Jamma Harness or from the power supply.


That is if they fit in the Candy. I dunno if they would fit though...Maybe someone else can confirm this.

They won't fit in my MVS 25 Candy..that's for sure without some drilling/destroying etc...

I don't know what the Neo 29 joysticks/layout looks like,but I would figure it's a similar stick design/layout as mine.

Now if that's what you want to do..I think it can be done..It's going to be a job to do though..
 

chris1

POCKETBIKE NUT,
Joined
Oct 18, 2002
Posts
10,830
Does your cab look like this..
jc03.jpg


Or
jc04.jpg


or..?

My layout is similar to the layout on the above pic..

My sticks are connected to the control panel overlay..and it dosn't look like they come off..
For me to change the type of sticks..I think that would mean making some kind of other overlay..ouch..
The overlay and joystick housings look like that whole piece would have to be replaced.
44686.jpg
 
Last edited:
Top