Consolized Sega ST-V

twalden · Dec 11, 2003

Has anyone made one yet? I'm getting tired of having to swap boards in my JAMMA cabinet and it would make my life easier if I could hook my ST-V board up to the TV. I was just looking for ideas, I'll probably start on this project soon.

chris1 · Dec 11, 2003

twalden said:
Has anyone made one yet? I'm getting tired of having to swap boards in my JAMMA cabinet and it would make my life easier if I could hook my ST-V board up to the TV. I was just looking for ideas, I'll probably start on this project soon.

That's not a bad thought....

I wonder how hard it would be to make.

NGT · Dec 11, 2003

That board is huge, what kind of shell are you planning on having for it?

neo-geo 2 · Dec 11, 2003

NGT said:
That board is huge, what kind of shell are you planning on having for it?

Huge?

Have you ever seen a Sega Model 2 or 3 set? Those are HUGE!

Try cond. one of those, that would be a big accomplishment.

twalden · Dec 11, 2003

I will probably custom build one since all of the project boxes that will hold it are way too tall. I built a custom PC case a while back out of plexiglass that came out pretty nice. I'll probably go that route.

Reznor007 · Dec 12, 2003

NGT said:
That board is huge, what kind of shell are you planning on having for it?

A NeoGeo MV-1 is bigger than STV actually. If you want to see really big, try Primal Rage...

Decepticon · Dec 12, 2003

Sweet idea. It shouldn't be too hard to do and would be a great thing to sit next to a consolized MVS.

Amano Jacu · Dec 12, 2003

This works pretty well as a consolized STV, it even takes CPS2, and inferior ports of some Model games...

Sorry. I couldn't resist :multi_co:

NGT · Dec 12, 2003

It also works for consolized MVS

also, the stv system is wider then the mv-1

Reznor007 · Dec 12, 2003

If it is, it's not by much...I can't remember exactly how big STV is at the moment.

NGT · Dec 13, 2003

At least they're a little bit wider,lol..

Reznor007 · Dec 13, 2003

Hmm...going by the JAMMA connector the STV might be 1-2" wider than a MV1. MV1 is longer though.

chris1 · Feb 18, 2004

Sorry for bumping this old thread..
As I was taking this metal case off it's wood/board and all it's wiring apart I thought about this old thread.

This originally held an ST-V Board that was in Atlus/Sega Print Club 2 Machine.

What do you think about using this for a Consolidated ST-V board..
It's heavy but not too heavy,it also has vent holes on the sides and plenty of pin hook ups for wiring etc..
It just needs some sort of a top that I didn't take...Say a Plastic/wood top,lid/with a hole on it to change the carts..

I don't know,just curious..

Lagduf · Feb 18, 2004

Seems like that would make a great shell to use for a consolized STV. I say go for it chris1!. I'd love to see a good looking consolized stv system.

chris1 · Feb 18, 2004

Lagduf said:
Seems like that would make a great shell to use for a consolized STV. I say go for it chris1!. I'd love to see a good looking consolized stv system.

Thanks Lagduf..

I'm not going to make one.
To be honest I really don't know how or what I really need..

I think I have enough spare parts around to make a consolized MVS that I would rather make but as I wrote.(To be honest I really don't know how or what I really need..)

But I think someone may be able use this..

I want to get rid of all this excess stuff..
I'm going to throw it up on Ebay cheap..

I think the Shipping may be to high though..unless I take all the wiring off of it..

Consolized Sega ST-V

twalden

Leona's Therapist

chris1

POCKETBIKE NUT,

NGT

J. M Club, ,

neo-geo 2

Raiden's Valet

twalden

Leona's Therapist

Reznor007

Host for Orochi

Decepticon

Mizuki's Demon

Amano Jacu

Charles Barkley

NGT

J. M Club, ,

Reznor007

Host for Orochi

NGT

J. M Club, ,

Reznor007

Host for Orochi

chris1

POCKETBIKE NUT,

Lagduf

2>X

chris1

POCKETBIKE NUT,