wiseman9986
Krauser's Shoe Shiner
- Joined
- Jan 18, 2003
- Posts
- 229
does anyone know where i can get the cables to hook up a memory card reader
memory reader were do i get the cables
- Thread starter wiseman9986
- Start date
Krauser's Shoe Shiner
ttooddddyy
PNG FTW,
- Joined
- Nov 29, 2001
- Posts
- 8,335
Good luck wiseman, but I think they are hard to come by nowadays unless they are included in a card reader deal.
I had a spare pair that I virtually gave away- damn
I had a spare pair that I virtually gave away- damn
wiseman9986
Krauser's Shoe Shiner
- Joined
- Jan 18, 2003
- Posts
- 229
are they just like ummm 60? pin ide cables
ttooddddyy
PNG FTW,
- Joined
- Nov 29, 2001
- Posts
- 8,335
Yes they are, so you could get a pair made up. Finding originals may be tricky unless they come with the MV-1C. You could hard wire direct from the mobo CN6/CN7 IDE sockets to the PCMCIA 68 pin reader socket. That way you dont need the MV-1C board or original connecting leads.
Wiring is not as bad as it looks as half the connections are common ground.
I have the pin out if anyones interested.
Wiring is not as bad as it looks as half the connections are common ground.
I have the pin out if anyones interested.
CheapNeoGeo
Kula's Can,
- Joined
- Mar 17, 2002
- Posts
- 311
I have looked and looked myself to find somewhere that had the data cables, but I never found a place so I had to break down and buy another memory card reader that came with data cables. It is just a 60 pin connector and the headphone connector is a .100 4 pin molex conector. Any well stocked electronics store should have what you need to make a cable(s).
ttooddddyy
PNG FTW,
- Joined
- Nov 29, 2001
- Posts
- 8,335
chris1 said:
I posted it on the tech forum about a year ago, but havent been able to locate. Still searching. Will post it on this thread when I find it. Should have got a copy
- Joined
- Nov 16, 2001
- Posts
- 4,071
i know, which thread it was and already sent Chris a pm.ttooddddyy said:I posted it on the tech forum about a year ago, but havent been able to locate. Still searching. Will post it on this thread when I find it. Should have got a copy
ttooddddyy
PNG FTW,
- Joined
- Nov 29, 2001
- Posts
- 8,335
Thanks supergoose. Please post the link to that thread here, there have been a couple of PMs requesting it, and im damned if I can find it.
Thinks
from now on im keeping anything tech related in a folder. One of these days Im going to get organazised.
Thinks
from now on im keeping anything tech related in a folder. One of these days Im going to get organazised.
Last edited:
wiseman9986
Krauser's Shoe Shiner
- Joined
- Jan 18, 2003
- Posts
- 229
could i just cut the end off of a scuzzy cable?
- Joined
- Mar 8, 2002
- Posts
- 3,686
SeaWolf69
Haomaru's Blade Shiner
- Joined
- Jun 8, 2003
- Posts
- 688
Hey,
I found a place that sells the cables & the MV-IC. They are $25 a peice. I recently won a MV-IC via Ebay and it didn't come the cables & I just got through ordering a set from http://www.thegameroom.com/index.htm . I will let you know how it turns out.
ttooddddyy
PNG FTW,
- Joined
- Nov 29, 2001
- Posts
- 8,335
Seawolf
Thanks for the link
from the boards for sale page
"This Page Was Last Updated : 12/14/2000"
Good luck with the cables
Thanks for the link
from the boards for sale page
"This Page Was Last Updated : 12/14/2000"
Good luck with the cables
SeaWolf69
Haomaru's Blade Shiner
- Joined
- Jun 8, 2003
- Posts
- 688
Yep,
They are original cables and they work great!!!. Question? What are the green wires attached to it supposed to hook up to? The place where I bought them from shipped them friday and I got them on monday. They shipped them even before I sent payment! Unusual, but well appreciated.
They are original cables and they work great!!!. Question? What are the green wires attached to it supposed to hook up to? The place where I bought them from shipped them friday and I got them on monday. They shipped them even before I sent payment! Unusual, but well appreciated.
ttooddddyy
PNG FTW,
- Joined
- Nov 29, 2001
- Posts
- 8,335
SeaWolf69 said:Yep,
They are original cables and they work great!!!. Question? What are the green wires attached to it supposed to hook up to? The place where I bought them from shipped them friday and I got them on monday. They shipped them even before I sent payment! Unusual, but well appreciated.
The green wires are ground connections, connect the one on the MV-1C end to the control panel metalwork and the mobo end to the board screening can (if it has one) or any other convienient ground point, its not critical.