Question on super guns

Breakz · Dec 4, 2003

I have wanted to collect and play neogeo stuff for a while and need some help getting started. The reason i post it in this section is because i want to build a supergun. It is a lot cheaper from what i hear. I have ps2 sticks already so can i get an adapter to convert them? If someone could send me a link or tell me how i can go about it, i would be very thankful.

oceanvein · Dec 4, 2003

www.hardmvs.com

it should be all you need, but there are plenty of people around that can help you build one, i for one have no idea how to do it.

just dont trade anything with me but if you do make sure i send first.

norton9478 · Dec 4, 2003

check the links section of sgrepository.com

Read the 4 sites and you should have a good idea of what you need to do...

Sg's are very simple machines and take no experiance....

I built my very first SG without USING A MULTI-METER OR A SOLDERING IRON....(tho my life is alot easier now that I Have and use both)

Also there are tons of people here and at the boards of sgrepository to help you....

Lik-Sang Sells a convter to allow PSX contols on a SG or Neo....

Breakz · Dec 4, 2003

I looked all over that site and could not find anything about making a supergun. He had someother stuff that was good to know but not what i was looking for. Thanks though.

Out

Amano Jacu · Dec 4, 2003

To know how to make a supergun, first you need to know how the arcade boards work, and that link has all the info you need for the MVS.

About making superguns, I would suggest these sites:

http://web.njit.edu/~jal0737/
http://dasfool.aroo.tv/Index.html
www.sgrepository.com

About the PS2 controllers, well, it is possible to mod them directly to make them work in a supergun, but as you said, if you make your supergun controller port be the same as the Neo Geo one then you can use the PSX->Neo adapter from www.lik-sang.com for example.

norton9478 · Dec 4, 2003

check the do it yourself links page

http://sgrepository.com/link-3.html

norton9478 · Dec 4, 2003

you will proabably also need one of these:

http://jrok.com/hardware/RGB.html

Last time I checked, they were 82.50 shipped.

Breakz · Dec 4, 2003

I have been looking around these sites and some of them dont have everthing that i need. I need to find a complete list of everthing i have to do becasue i am very inexperienced with dealing with electronics. I may be able to ask one of my friends to help me with that though. I like he page that is superguns for dummies but the video portion is not done.. Thanks for you help guys.

Out

norton9478 · Dec 4, 2003

all you need is:

Video Encoder(see link above)
Controller (neo geo works fine)
Some buttons and switches
Power Supply
Jamma Harness
2 15 pin D sub connectors
and an arcade board
Cast to house everything in...
Get some wire.
Speaker
Arcade npard

THe only other thing you need is an imagination to figure out how to put this stuff together.

Breakz · Dec 6, 2003

Ok, does anyone know of any good places in the states that sell the mvs and the jamma? Seen that i can find a lot of the parts locally but i have friends who build sticks so the should be able to help as far as sodering and getting the bottons and what not. Thanks guys.

Out

norton9478 · Dec 6, 2003

www.happcontrols.com

has controls, harnesses, PSU's and all sorts of stuff you might need.

For the switches, go to radio shack....

for a beginer: I'd recomdend this PSU/Harness Combo...IT's cheap too:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=3945&item=3258509332

It comes already wired... All you need to do is get terminals to add the fourth button. Happs part #49-0276-00

http://www.happcontrols.com/electrical_supplies/49001100.htm

Breakz · Dec 6, 2003

Thanks. Question though. The Item off ebay is a power supply that is already wired to the jamma cables? So if i got this then i dont need to et a power supply or the jamma cables?
Also need help finding a good site or person for a mvs( would like a 2 port but a one is cool as long it has the contoller ports)
Thanks again guys, as soon as i can collect as the info i need i will start collectin the parts.

Out

norton9478 · Dec 6, 2003

The ebay one is already wired......

All you have to do is plug it in....... If you use a PCB without the ports on-board you will have to get those terminal pins and put them in....

I bet if you ask the dude selling it to, He can insert wires into the harness for the fourth buttons and for a select switch.

But the package is well worth it...

wiseman9986 · Dec 6, 2003

check out www.mdgamesales.com theyve got good boards and games and none of the games are boots

Question on super guns

Breakz

n00b

oceanvein

Guest

norton9478

So Many Posts
No Time
For Games.

Breakz

n00b

Amano Jacu

Charles Barkley

norton9478

So Many Posts
No Time
For Games.

norton9478

So Many Posts
No Time
For Games.

Breakz

n00b

norton9478

So Many Posts
No Time
For Games.

Breakz

n00b

norton9478

So Many Posts
No Time
For Games.

Breakz

n00b

norton9478

So Many Posts
No Time
For Games.

wiseman9986

Krauser's Shoe Shiner

Question on super guns

n00b

oceanvein

Guest

So Many PostsNo TimeFor Games.

n00b

Charles Barkley

So Many PostsNo TimeFor Games.

So Many PostsNo TimeFor Games.

n00b

So Many PostsNo TimeFor Games.

n00b

So Many PostsNo TimeFor Games.

n00b

So Many PostsNo TimeFor Games.

Krauser's Shoe Shiner

So Many Posts
No Time
For Games.

So Many Posts
No Time
For Games.

So Many Posts
No Time
For Games.

So Many Posts
No Time
For Games.

So Many Posts
No Time
For Games.

So Many Posts
No Time
For Games.