Consolized SVC Jamma?

Decepticon

Decepticon

Mizuki's Demon
Joined
Apr 28, 2003
Posts
3,048
Would it be possible to consolize a Jamma PCB of SVC or Metal Slug 5?

What about a casing that you can just pull it out and swap with an MVS board or the Jamma PCB, similar to a supergun but with the casing of a consolized board?
 
norton9478

norton9478

So Many Posts
No Time
For Games.
20 Year Member
Joined
Oct 30, 2003
Posts
34,075
Consolizing would be kinda stupid...... But a supergun using a computer desktop (not tower)case would be great... That's what I use for mY SG....
 
Yodd

Yodd

Iori's Flame
20 Year Member
Joined
Feb 7, 2002
Posts
8,220
Unless you really want to go about it from a different angle, you could build something similiar to this:



Click teh pic for more pictures


Course you would probably want to use a more powerful psu then what I used (since those PCBs might have higher current requirements).

Minus the external psu, this mini SG is only about 6.5inches wide, 4 deep and 2 inches tall. Slides right up onto the PCB.
 
C

Chicago Cheeseburgler Crew

BANNED , Banned , Here's why
10 Year Member
Joined
Jun 11, 2002
Posts
24,280
broken said:
Unless you really want to go about it from a different angle, you could build something similiar to this:
.
Click to expand...
off topic i registered at your site Mr. broken and have not gotten an email confirming a pass word :mad:
 
Decepticon

Decepticon

Mizuki's Demon
Joined
Apr 28, 2003
Posts
3,048
broken said:
Unless you really want to go about it from a different angle, you could build something similiar to this:

(Big ass pic)

Click teh pic for more pictures


Course you would probably want to use a more powerful psu then what I used (since those PCBs might have higher current requirements).

Minus the external psu, this mini SG is only about 6.5inches wide, 4 deep and 2 inches tall. Slides right up onto the PCB.
Click to expand...


Damn nice work there broken, I am always amazed at the work you do, how much would something like that run me if you made it?
 
Yodd

Yodd

Iori's Flame
20 Year Member
Joined
Feb 7, 2002
Posts
8,220
FatGuy said:
off topic i registered at your site Mr. broken and have not gotten an email confirming a pass word :mad:
Click to expand...


hmm thats odd.

Cause When I went to the site it doesn't show any waiting accounts. You can view this on the left hand side in the Login box where shows new users yesterday and today.


I just created an account (SGRtest) and the password and account validation link was mailed to it in about a couple minutes.


Might want to try to register again.
 
A

Amano Jacu

Charles Barkley
Joined
Sep 11, 2001
Posts
8,594
Decepticon said:
Would it be possible to consolize a Jamma PCB of SVC or Metal Slug 5?

What about a casing that you can just pull it out and swap with an MVS board or the Jamma PCB, similar to a supergun but with the casing of a consolized board?
Click to expand...

Just use any supergun with a JAMMA harness and that's all. For the casing you can use virtually whatever suits your needs.
 
Decepticon

Decepticon

Mizuki's Demon
Joined
Apr 28, 2003
Posts
3,048
Re: Re: Consolized SVC Jamma?

Amano Jacu said:
Just use any supergun with a JAMMA harness and that's all. For the casing you can use virtually whatever suits your needs.
Click to expand...


Looks like I might be going that route.
 
You must log in or register to reply here.
Top