spacerangerjonny
n00b
- Joined
- Jun 12, 2003
- Posts
- 41
Or where I could find one cheap or something?
Anyone build, or know someone who builds, Superguns?
- Thread starter spacerangerjonny
- Start date
n00b
- Joined
- Nov 16, 2001
- Posts
- 4,071
i made about 20 guns and almost 10 consolized boards.
my advice :
don't buy a cheap system. go for quality.
I was gonna buy a super gun as well, but I decided if anything, I'm just going to get a pair of the MAS super nova sticks, and contract soeone to build the actual box for them. If anyone is interested, pls PM me. I'd just get a super nova, but the thing is so rediculously bulky, has the internal speaker, and doesn't even output stereo. Not to mention I've been told it uses an RGB to NTSC adapter that's inferior to the jrok and the composite video output really suffers because of this.
Matt
Matt
- Joined
- Dec 26, 2000
- Posts
- 13,852
Which is fine, I'd go with a one-slot mono board and then have the compatibility to use all other mono boards as well! It is a pain, one of these days I am going to switch mod my Candy cab!
-Nick
- Joined
- Aug 20, 2000
- Posts
- 60,434
i made a thing to switch back and for between mono and stereo, i wrote an faq on it.
i could build the sg for you, but i would need $$$ up front.
i could build the sg for you, but i would need $$$ up front.
I'd have no problem paying up front, but I'd like to see what kind of design I'm paying for first. I don't really want a huge bulky box like the super nova.sonic1687:
i made a thing to switch back and for between mono and stereo, i wrote an faq on it.
i could build the sg for you, but i would need $$$ up front.
Matt
Snooptalian
Hairdresser, ,
- Joined
- Aug 29, 2002
- Posts
- 935
If you're looking for a small Supergun, try to find a Sigma 6000. It is top of the line in quality, small steel housing and has standard Neo ports built in so you can use your Neo sticks with it. Only problem is that they are very expensive, but worth it IMO.
<small>[ August 01, 2003, 11:11 PM: Message edited by: Snooptalian ]</small>
<small>[ August 01, 2003, 11:11 PM: Message edited by: Snooptalian ]</small>
- Joined
- Aug 20, 2000
- Posts
- 60,434
its a very small box, the width of a jamma harness, and about 2 inches high and 3 deep.Force:
I'd have no problem paying up front, but I'd like to see what kind of design I'm paying for first. I don't really want a huge bulky box like the super nova.sonic1687:
i made a thing to switch back and for between mono and stereo, i wrote an faq on it.
i could build the sg for you, but i would need $$$ up front.
Matt
<a href="http://mywebpages.comcast.net/sonic1687/supergun/supergun%20007.jpg" target="_blank">http://mywebpages.comcast.net/sonic1687/supergun/supergun%20007.jpg</a>
theres a pic of mine, before i finished it anyway. i did a really stupid design with rgbs each on a phono jack. now its in a db 9. mine doesnt have a jrok in it since i have an rgb monitor. although i'd like to get one