Can you get to the Test mode straight of the board?

[Ion]

I hvnt got a test button wired onto my supergun, so can i access it off the Hyper?

thnx

[DarkskyZ]

Sure you can !
Just simulate the test button by joining the Jamma "15" pin to any "ground" pin using a small wire to make a single touch while your Hyper board is on running and it will do the trick. Just be carefull doing it. I used to do that and then I wired up a button and this is far more confortable, believe me http://www.neo-geo.com/ubb/redface.gif)

DarkskyZ