Hyper Neo 64 with Super Nova hook-up...

For all those that are using the Super Nova with their Hyper Neo 64, please let me know how you hooked it up. I especially want to know how you got the 4th button to work and how to activate test mode. Sorry to repeat this, but I am losing my temper...

On the jamma connector put a wire on each point "c"(2p) and 25(1p) (these are opposite each other)take these two wires to your 4th buttons repectively. And take an ground (GND) wire from the buttons to any earth point on the jamma connector. (these can be looped so that all buttons are on one GND point

test mode is done by a wire on "M" to your button and then as before a gnd wire to any gnd point on the jamma.

Job done