Insert Feevah!!!!

Ok. Thats it...with all this inserty-ness going on, i decided i have to contribute. I am planning on making a metal slug, metal slug x, or KOF95 insert. i just need suggestions on how to get started (size, layout, things i should know about photo shop etc.) I reaally want to know what size/layout to use. Also, all my inserts will be landscape...because its different and damn sexy! <IMG SRC="smilies/biggrin.gif" border="0">

I could help you out. To make a large insert (older games) 14.6875 inches width and 8.25 inches tall. To make a smaller one (newer games) 12.8125 width and 8.25 tall. If you need any help just give me an email.

Remember you can't print these on legal paper because 1/4 of an inch already gets cut off on all printers. You have to either have a special printer or go somwhere to get them printed out. They usually use a 11x18 or something around that range.

thanks, but do you know the measurements for the snazzy MVS cases? also, can you give me a measurement on how wide the spine should be? thanks

MVS Insert size = 14.8" x 9.25"

argh!! dammit!! how do you make the background of an image transparent??