my "Arcade Tv Set"

Hi ! everybody !

Here's my last project:
Not a simple super gun but an integrated one, in the tv set..

I used second hand compos, like transformers and capacitors, etc.
So i build a low cost power supply for my 4 slots MVS.
It costs me less than 100$ with jamma harness.
I used a LM1881, because my t.v. needs one to synch the RGB picture.

<img src="http://www.arcade.4.free.fr/borne/borne00.jpg" alt=" - " />

<img src="http://www.arcade.4.free.fr/borne/borne01.jpg" alt=" - " />

<img src="http://www.arcade.4.free.fr/borne/borne02.jpg" alt=" - " />

<img src="http://www.arcade.4.free.fr/borne/borne03.jpg" alt=" - " />

<img src="http://www.arcade.4.free.fr/borne/borne04.jpg" alt=" - " />


What do you think about this "original" supergun ?

IT kind of looks like you were going for the NEO Hotel Unit look. Am I correct?


It looks nice. Does that TV have SCART?


GAMEFAN

thanks
yeap, it's in fact a kind of home maid neogeo hotel system!

There is two scart connectors on this t.v. and it accepts 50/60Hz Secam, Pal, and Ntsc.



<small>[ August 09, 2003, 09:16 PM: Message edited by: JAMMASLOT ]</small>

Really nice looking, man! Good job on it!

How long did this take to build?

<small>[ August 09, 2003, 09:18 PM: Message edited by: DanAdamKOF ]</small>

Wow, great idea. buttrock Now I want to wire jamma finger board to the back of my display, mount joystick ports on the front, and use a female-female cable to hook my boards up to the edge in the back. Save on a hell of a lot of mess that way.

DanAdamKOF:
Really nice looking, man! Good job on it!
How long did this take to build?

Click to expand...

Thanks ! glee

I build it in approx. 20 hours
I needed at least half the time for cutting and adjusting the metalic parts. (like the player coins box)

It looks really cool...Sweet..Nice Job.

Looks great! PRetty original! Although it must be kind of a pain to switch carts in your 2 slot board under that TV stand!

Thanks, it's a four slots mvs board! In fact i'm very lucky because i have just the space to change the cartridges... if it was just half inch less i couldn't change the cartridge.
smirk