Mitsubishi diamond pro 2020U monitor question

ballzdeepx

ballzdeepx

Rugal's Secretary
20 Year Member
Joined
Sep 20, 2004
Posts
3,072
If the monitor accepts 15khz then yes all you should need is a scart to BNC creakout cable that will come from the output of your scart switch (if you have one)
IF the monitor also supports 31khz then you'll have the best of both worlds really.
 
Skips

Skips

Belnar Institute Student
Joined
Aug 8, 2012
Posts
1,248
No it will not work. Its frequency range is 30-121 Hz
 
GohanX

GohanX

Horrible Goose
20 Year Member
Joined
Sep 28, 2001
Posts
12,495
That looks like a really good monitor on the spec sheets, it would probably be pimp as fuck paired with a XRGB2.
 
GohanX

GohanX

Horrible Goose
20 Year Member
Joined
Sep 28, 2001
Posts
12,495
yes, that's specifically what the XRGB2 is made for. Low res RGB in, high res RGB out with scanlines if you like.
 
Opethian

Opethian

Basara's Blade Keeper
10 Year Member
Joined
Dec 22, 2009
Posts
3,668
XRGB2 cannot emulate scanlines only the 3 and Framemeister can do that. You can use a mini SLG tho inline with the VGA for scanlines @ 640x480 and 1024x768
 
S

slai50

New Challenger
Joined
Apr 21, 2006
Posts
56
I thought the XRGB-2 could do scanlines? Which do you guys think would look better, xrgb-2/diamond pro monitor(31khz) combo or just hooking the RGB consoles up to a sony BVM-20F1U(15khz)?
 
Yodd

Yodd

Iori's Flame
20 Year Member
Joined
Feb 7, 2002
Posts
8,214
Opethian said:
XRGB2 cannot emulate scanlines only the 3 and Framemeister can do that. You can use a mini SLG tho inline with the VGA for scanlines @ 640x480 and 1024x768
Click to expand...

Ope pls.


The XRGB2 does have a scanline option.
 
Opethian

Opethian

Basara's Blade Keeper
10 Year Member
Joined
Dec 22, 2009
Posts
3,668
doh me dumb 2plus has the density the 2 has V_Line option for scanline I never knew that
 
You must log in or register to reply here.
Top