The Webmiester
Pvt. Picklestein,
- Joined
- Aug 4, 2001
- Posts
- 425
Hi,
Finally got a PVM, a little 1341. My problem is that with RGB, my picture is shifted to the right by enough that it's annoying. I've done all the adjustments inside but H-Centering is a little weird.
There's a sub-board (QD) that has two horizontal centering knobs, one internal and one external, but the manual says that only applies to the Digital RGB. Moving them does nothing at all.
There's also a large pot on the main (A) PCB marked "H.CENT". It has an effect but seemingly not enough, it's all the way in the direction that goes towards centering it. Moving it the other way worsens the problem.
Any ideas? Thanks guys.
Finally got a PVM, a little 1341. My problem is that with RGB, my picture is shifted to the right by enough that it's annoying. I've done all the adjustments inside but H-Centering is a little weird.
There's a sub-board (QD) that has two horizontal centering knobs, one internal and one external, but the manual says that only applies to the Digital RGB. Moving them does nothing at all.
There's also a large pot on the main (A) PCB marked "H.CENT". It has an effect but seemingly not enough, it's all the way in the direction that goes towards centering it. Moving it the other way worsens the problem.
Any ideas? Thanks guys.