Bill Kilgore
Sent Rot A Secret Santa.Didn't Get Banned.FOOKIN A
- Joined
- Jul 14, 2014
- Posts
- 1,101
So i thought i would clean my monitor and chassis board with some compressed air. Afterwards i turned it on. Now there are very thin horizontal black lines on the sides but in the middle everything is normal.
This is a screenshot from the side:
This is a screenshot from the middle:
As you can see because of those lines everything on the side looks darker. It's like the pixels are a bit smaller then the ones in the middle.
This seems to be a bit more noticable with dark green and dark blue colors. Could it be that i need to adjust the drive of these colors or is it in need of a cap kit? Light colors like white and yellow don't seem to be affected by this at all.
This is a screenshot from the side:
This is a screenshot from the middle:
As you can see because of those lines everything on the side looks darker. It's like the pixels are a bit smaller then the ones in the middle.
This seems to be a bit more noticable with dark green and dark blue colors. Could it be that i need to adjust the drive of these colors or is it in need of a cap kit? Light colors like white and yellow don't seem to be affected by this at all.
Last edited: