PDA

View Full Version : Konami 3P 4P connector



Pasky
01-08-2015, 01:09 AM
Anyone know the kind of connector I can get from digikey (or anywhere) that would fit these pins so I can wire up a few harnesses? Thanks.

Atro
01-08-2015, 02:55 AM
Anyone know the kind of connector I can get from digikey (or anywhere) that would fit these pins so I can wire up a few harnesses? Thanks.

That would be awesome to know.
I have a few 4P Konami pcb's and I only have one harness.
I want to build a 4P supergun to party with those gems - 4P cabs are ugly and you look like you're in a gangbang.

That would come very handy.

Lemony Vengeance
01-08-2015, 02:59 AM
I personally used a Molex connector.. They're super common and will fit. The REAL connector is a 15 pin JST NH series connector that is as hard as BALLS to find.


You're better off using the Molex connector :p

Pasky
01-08-2015, 08:31 AM
EDIT:

These were incorrect.

Xian Xi
01-08-2015, 04:57 PM
The JST for Konamis are 2.50 pitch iirc.

Xian Xi
01-08-2015, 05:00 PM
This is the correct one, 200 piece minimum.

http://www.digikey.com/product-detail/en/H15P-SHF-AA%28P%29/H15P-SHF-AA%28P%29-ND/1885763

Pasky
01-08-2015, 05:08 PM
Ah thanks for that, guess the Chinese one I was looking at had the spec's wrong. No surprise :P.

Atro
01-09-2015, 04:19 AM
This is the correct one, 200 piece minimum.

http://www.digikey.com/product-detail/en/H15P-SHF-AA%28P%29/H15P-SHF-AA%28P%29-ND/1885763

An interest check could be made and we could do a group buy of these.
Splitting units could be the key. I'd take a few. ( Few! )

Pasky
01-09-2015, 08:35 AM
http://www.digikey.com/product-detail/en/EHR-15/455-1013-ND/527237

2.50mm pitch, 15 positions, no bulk order required, and in stock.